BLACK ANTI-WEED MESH 1.50x20mt 130grs.

• Silica sands are the most ecological and natural in Spain, free of chemical products (amines and hydrofluoric acid) and without salinity. Washed exclusively with natural waters and dried with biomass.
• They are characterized by being aeolian, round or spheroid sands, without edges, allowing the product not to cake or compact, facilitating drainage. Granulometries: 0.2-0.5s/ 25kg

SILICA PALLET 1,200kg – 48sacksx25kg

Joint tape for the installation of turf.

0.15x25mt roll.

Special pegs for artificial turf.

Pack of 100 units.

Anti-weed textile mesh, made of polypropylene.

Resistant to dry rot and fungal attacks.

It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

2x100mt

Seaming tape for lawn installation.

0.30x25mt roll.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Set of nets for 2 polypropylene handball goals.

Different sizes, colors and designs available.

100mm knotless square mesh, knotless

Mesh of 3, 4, 4.5 and 5mm thick.

* Catalog attached – Request a quote

• Description: Modo ECO-PLAST model bench made of high-quality polypropylene. Materials: Seat and backrest in Polypropylene.

Legs: High-density polyethylene + Fiberglass

– UV treated.

– Maintenance-free.

– Anti-graffiti.

– High robustness.

– Stainless steel screws.

– Packaging: Palletized and plasticized.

Practical tube for collecting balls effortlessly, simply press on the balls that are on the ground and they will enter the tube.

To empty it, simply open the lid on the other side.

Length: 120 cm

Capacity: 17 balls

Weight: 0.8 kg

• Specially designed for children and beginners. The Tennis Twist can be used in clubs and schools, as well as in gardens, driveways and even basements. The machine is very easy to use – just turn it on and it shoots a ball every five seconds. The arc of the ball can be adjusted anywhere from approx. 3 – 6 meters.

Technical data:

Ball capacity: 28 balls

Dimensions (HxWxD): 50 x 20 x 20 cm

Weight: 5 kg

Power: battery

Playing time: 5-6 hours

Feed interval: 5 sec.

Maximum speed: 15 km/h

Ball flight: straight

Lines-directions: 1 direction

Ball spin: no

Case: plastic

Remote control: no on and off switch

Anchor set for the installation of Speziala lines: II

18 stainless steel tubular anchors

• 8 pieces with 4 cm anchors

10 pieces with 5 cm anchors.

Fixing bracket with 2 hooks for hanging hand brushes, mats, etc.

Made of steel, green, plastic-coated for Ø 60 mm posts.

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

Scraper for scraping compacted soil.

Galvanized iron teeth

Working width 1mt

• * Iron teeth replacement available

Set of two cylinders with metal spikes.

Galvanized and oven-dried painted finish.

Easy adaptation to the motor hoe.

Ideal for milling the court, does not lift the rubble.

Axle included.

• The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
• The milled material is ejected and can be transported in wheelbarrows with little effort.

The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

• The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

• It adapts to all access doors and can be easily operated by a single person.

TECHNICAL DETAILS:

• – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

– Length: approx. 800 mm

– Width: approx. 850 mm.

– Height: approx. 1000 mm

– Milling width: approx. 655 mm

– Weight: approx. 75 kg

* Honda engine warranty