Atlas Fountain
Atlas Fountain
Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.
Finished with epoxy primer and gray hammered powder polyester paint.
Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.
You may also be interested in
Oslo Bench – Various sizes
324,50 €- The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
- The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.
All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.2-space bicycle rack
112,20 €- Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.
Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.
6-space bicycle rack
159,50 €- Bicycle rack manufactured in hot-dip galvanized steel.
Anchoring: Using M8 expansion bolts, depending on the surface and project.
Picnic Table
429,00 €Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.
Circular metal trash can 60l
88,00 €- BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.
Measurements 885xD370m
Hinged bucket with safety lock.
Reinforced feet.
Zinc-plated and immersion electrowelded steel sheet.
Painted in gray RAL 7011
Semi-circular trash can 40L
115,50 €- Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.
Measurements: 455mm diameter, 605mm total height.
Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.
Delta Bench – Various sizes
700,70 €The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.
Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.
Stainless steel screws.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
NeoBarcino Bench – Various sizes
401,50 €Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.
It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.
We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.
THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.
The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a
optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and
impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of
gray-hammered polyester powder paint.
The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.
All the screws are made of stainless steel.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
What you’ve seen…
6-space bicycle rack
159,50 €- Bicycle rack manufactured in hot-dip galvanized steel.
Anchoring: Using M8 expansion bolts, depending on the surface and project.
Basketball net Round 6mm.
8,80 €Two-color basketball nets for 12 hooks made of 6mm thick polypropylene thread.
Honda FG201B Sweeper with brushes
2.310,00 €Sweeper with Honda GXV 50 engine, powerful and quiet, you will always start the first time. Low emissions and low consumption
The Honda FG 201 B sweeper allows you to easily remove foreign particles on the surface and the green dust from fiber wear, while cleaning all the dirt that is mixed with the sand.
Its high-quality brush system provides excellent sweeping for medium and small debris. You have two types of brush, standard or hard, to choose from depending on the surface to be swept or if you are going to use the machine for maintenance or regeneration of a surface covered with artificial turf.
Lateral paddle tennis protection net 3x16mt.
143,00 €3mm knotless polypropylene mesh, manufactured, with perimeter finish.
Size: 3x16mt
Color: black.
Narrow steel wire brush, with 2mt arch.
231,00 €- For scraping tennis courts and removing leaves.
- Ideal tool for spring and autumn season.
- Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.
With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.
Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.
Length: 200 cm
Guide rod width: 5 cm
Guide rod height: 3 cm
- Bristle height; 7.5 cm
Bristle distance: approx. 1 cm
- Weight: approx. 5.7 kg
Working width 200 cm.
Ratchet tensioner
103,40 €- Galvanized ratchet tensioner with fastening anchors and special straps for tensioning the Speziala tennis line.
2MT Aluminum PVC Mat – Fine double mesh
275,00 €2 Layers of fine mesh PVC material, with final finish
Length: 1.15m
Aluminum ruler
Working width: 2m
Replacement court sweeper
57,20 €Replacement court sweeper. 90cm
Tamper – Rammer
104,50 €Galvanized solid iron tamper or rammer.
Wooden handle.
For small court repairs and tablet pressing.
Working surface: 20x20cm.
Tilting trailer with universal hitch
495,00 €- REMOVABLE SIDES: The sides can be completely removed. The lower part of the side is closed and the upper part are platforms with bars.
- TECHNICAL DATA: The garden trailer has the following data: Tires: 4.00-8 c I General dimensions approx. (L x W x H): 167 x 80 x 80 – 108 cm (with the bars) I (L x W x H): 110 x 71 x 35 – 62 cm (without the bars) I Max. load weight: 300 kg I Tare: 55kg I Height of the sides (without the bar platforms): 330 mm I Height of the sides (with the bar platforms): 630mm Maximum speed: 5 km/h
- UNIVERSAL HITCH: The trailer has a universal hitch. The hitch IS NOT a ball hitch, it is not a trailer for street traffic, but for use in private gardens, orchards, etc.
- IDEAL: The trailer is suitable for soil, foliage, sand, gravel, gardening tools, plants, flowers, small or medium boxes, etc.
Total WIDTH: 167 cm

















