USP10 milling machine
3.058,00 €
USP10 milling machine
- The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
- The milled material is ejected and can be transported in wheelbarrows with little effort.
The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.
- The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.
Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.
- It adapts to all access doors and can be easily operated by a single person.
TECHNICAL DETAILS:
- – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP
– Length: approx. 800 mm
– Width: approx. 850 mm.
– Height: approx. 1000 mm
– Milling width: approx. 655 mm
– Weight: approx. 75 kg
* Honda engine warranty
What you’ve seen…
Lawn installation peg
396,00 €Special pegs for artificial turf.
Pack of 100 units.
Semi-circular trash can 40L
115,50 €- Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.
Measurements: 455mm diameter, 605mm total height.
Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.
Badminton net
Request a quoteBASIC BADMINTON C-PVC SUPERIOR
-Size: 1.85×1.22m
-Made with High Tenacity Polypropylene Thread.
-2mm thick net, 18mm mesh width.
-White PVC top band, black polyester trim on the sides and bottom of the net.
-One eyelet in each upper corner of the net and double tension cord of 0.3mm.
-0.4mm plasticized steel cable.
* Also available in BASIC BADMINTON C-PES SUPERIOR and HIGH COMPETITION BADMINTON C-PS SUPERIOR.
Narrow steel wire brush, with 2mt arch.
231,00 €- For scraping tennis courts and removing leaves.
- Ideal tool for spring and autumn season.
- Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.
With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.
Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.
Length: 200 cm
Guide rod width: 5 cm
Guide rod height: 3 cm
- Bristle height; 7.5 cm
Bristle distance: approx. 1 cm
- Weight: approx. 5.7 kg
Working width 200 cm.
2MT Aluminum PVC Mat – Fine double mesh
275,00 €2 Layers of fine mesh PVC material, with final finish
Length: 1.15m
Aluminum ruler
Working width: 2m
3MT Wood PVC Mat – Fine double mesh
264,00 €2 Layers of fine mesh PVC material, with final finish
Length: 1.15 meters
Wooden rule
Working width: 3 meters
Sweeping brush 50CM
16,50 €Support: Galician pine wood
Fiber: 1.2mm strong black PVC
Sewn: With galvanized wire
- Galician wood handle 1.2 meters long, adjusted with metal clamp
Solenoid valve pgv mb 1.5
83,60 €
HUNTER PGP-10CM Sprinkler
33,00 €- .• Model: 10 cm
- Sector configuration: from 40° to 360°
- Factory-installed rubber cover
- Top-side sector adjustment
- Quick sector verification mechanism
- Water-lubricated gear drive
- Nozzle types: 27 in total
- Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
- Warranty period: 2 years
Multi-tool – Wire brush
759,00 €Wire brush for attaching to a multi-tool
Working width 2MT.
Iron bristles.
Adjustable height
Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.
* Brush replacement available