1MT court drying roller.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15mts.

Wooden ruler

Working width: 2 mts.

Very light.

Support: Galician pine wood

Fiber: 1.2mm strong black PVC

Sewn: With galvanized wire

• Galician wood handle 1.2 meters long, adjusted with metal clamp

Replacement court sweeper. 90cm

Absorbent drum with foam covering.

• Structure and body of the drum, hot-dip galvanized.
• Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

Working width 80 cm.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15m

Aluminum ruler

Working width: 2m

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

4mm thick polypropylene tennis net with PVC top band and side and bottom reinforcements, customized with screen printing, with the logo provided by the client.

Minimum order 10 units.

Set of two cylinders with metal spikes.

Galvanized and oven-dried painted finish.

Easy adaptation to the motor hoe.

Ideal for milling the court, does not lift the rubble.

Axle included.