1MT court drying roller.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15m

Aluminum ruler

Working width: 2m

WIDE YELLOW BRUSH 1MT

Wooden support 1040x65mm

1.2mm polyprotylene bristles

Galician wood handle attached with metal clip.

Working width 1mt.

To remove dirt after rain.

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

Support: Galician pine wood

Fiber: 1.2mm strong black PVC

Sewn: With galvanized wire

• Galician wood handle 1.2 meters long, adjusted with metal clamp

Absorbent drum with foam covering.

• Structure and body of the drum, hot-dip galvanized.
• Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

Working width 80 cm.

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

For filling holes and leveling irregularities.

Working width 100 cm wide.

With wooden handle.

Joint tape for the installation of turf.

0.15x25mt roll.

Material: 70% PE – 30% PP

Yarn weight: 2070gr/m2

Yarn height: 22mm

Total product height: 24mm

Total product weight: 3000gr/m2

Backing Type: Polyurethane

Standard roll length: 25 m

Standard roll width: 2 – 4 m

Reaction to fire classification: Efl

Color(s): 4 colours

Stitches: 27300

European manufacture

TECHNICAL CHARACTERISTICS

Composition: Blend of polyethylene and polypropylene monofilament – 4 colors

Resistant to UV rays

Total thickness: ± 40 mm.

Total weight: ± 2885 gr / m²

Turf height: 38 mm

Stitches: 30,240

European manufacture

Aluminum toothed scraper

Wooden handle

Working width 70cm

• * Replacement saws available

Absorbent drum with foam covering.

• Structure and body of the drum, hot-dip galvanized.
• Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

Working width 80 cm.

Bucket with galvanized grid and sponge with aluminum handle.

To absorb small puddles on the court.

There is a replacement for the foam

• Models: 10 and 15 cm
• Models with stainless steel riser: 10 and 15 cm
• Arc setting: 50 to 360 degrees
• Factory-installed rubber cover
• Top-adjustable arc
• Quick arc verification mechanism
• Water-lubricated gear drive
• Nozzle types: 12
• Nozzle models: #4 to #2
• Warranty period: 5 years

Accessory for Tromber_Tenis multi-tool

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Aluminum rule

Working width: 2 meters

Reinforced polyester guide center and Universal embroidery

• Aluminum carabiner.

Metal regulating buckles.