2-space bicycle rack

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

Finished with epoxy primer and gray hammered powder polyester paint.

Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

Sweeper with Honda GXV 50 engine, powerful and quiet, you will always start the first time. Low emissions and low consumption

The Honda FG 201 B sweeper allows you to easily remove foreign particles on the surface and the green dust from fiber wear, while cleaning all the dirt that is mixed with the sand.

Its high-quality brush system provides excellent sweeping for medium and small debris. You have two types of brush, standard or hard, to choose from depending on the surface to be swept or if you are going to use the machine for maintenance or regeneration of a surface covered with artificial turf.

Size 110x195cm

Text in Spanish: VISITANTE/LOCAL

Possibility of adding the club’s logo for free.

• Easy and quick installation.

Weatherproof PVC.

They can remain outdoors and require very little maintenance…

The new ball collection net eliminates the risk of injuries caused by tennis balls on the court. Whether for individual or group training, when using ball machines, this net prevents tennis balls from rolling around the court. The simple and quick collection of balls also saves time.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

Aluminum rake with soft rubber teeth

Wooden handle.

For collecting leaves and surface dirt from the court.

Width: 75cm.

• Models: 10 and 15 cm
• Models with stainless steel riser: 10 and 15 cm
• Arc setting: 50 to 360 degrees
• Factory-installed rubber cover
• Top-adjustable arc
• Quick arc verification mechanism
• Water-lubricated gear drive
• Nozzle types: 12
• Nozzle models: #4 to #2
• Warranty period: 5 years

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, polyester tape on the sides and black polyester trim on the bottom of the net. An eyelet in each corner of the net and 3mm double tension cord. 5mm plasticized steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

Set of two cylinders with metal spikes.

Galvanized and oven-dried painted finish.

Easy adaptation to the motor hoe.

Ideal for milling the court, does not lift the rubble.

Axle included.