2-space bicycle rack

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

Finished with epoxy primer and gray hammered powder polyester paint.

Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

Posts made of 80 mm round steel, designed to be anchored to the ground

using metal canisters -not included-. Includes tensioning ratchet to tighten the net cable to be placed, in

the upper part they have the net height adjustment system, which allows playing volleyball in its different categories and by

lastly the lower part is provided with the corresponding hitches for the practice of tennis. Post measurements:

280cm

Scoreboard to adapt to the umpire’s chair.

Legible from the front and back.

With fixing material adaptable to all umpire chairs, numbers 9 cm high.

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

The new ball collection net eliminates the risk of injuries caused by tennis balls on the court. Whether for individual or group training, when using ball machines, this net prevents tennis balls from rolling around the court. The simple and quick collection of balls also saves time.

• REMOVABLE SIDES: The sides can be completely removed. The lower part of the side is closed and the upper part are platforms with bars.
• TECHNICAL DATA: The garden trailer has the following data: Tires: 4.00-8 c I General dimensions approx. (L x W x H): 167 x 80 x 80 – 108 cm (with the bars) I (L x W x H): 110 x 71 x 35 – 62 cm (without the bars) I Max. load weight: 300 kg I Tare: 55kg I Height of the sides (without the bar platforms): 330 mm I Height of the sides (with the bar platforms): 630mm Maximum speed: 5 km/h
• UNIVERSAL HITCH: The trailer has a universal hitch. The hitch IS NOT a ball hitch, it is not a trailer for street traffic, but for use in private gardens, orchards, etc.
• IDEAL: The trailer is suitable for soil, foliage, sand, gravel, gardening tools, plants, flowers, small or medium boxes, etc.

Total WIDTH: 167 cm

Shade/privacy screen, provides privacy and protects from the wind.
Various densities and colors, rolls of different heights and lengths

Produced in a raschel system, non-fraying product, composed of high-density HDPE monofilament and polyethylene raffia tape.

Facilitates privacy in outdoor work.

It can be adapted to the required size due to its easy cutting.

• Option of custom manufacturing with eyelets.

Fabric very resistant to fraying.

With UV treatment for 2 years of protection.

Mesh manufactured in Spain.

Wire brush for attaching to a multi-tool

Working width 2MT.

Iron bristles.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available