Adhesive joint tape 0.15x25mt

Textile anti-weed mesh, made of polypropylene.

It is applied as an anti-weed sheet, for artificial grass base, professional growers, gardeners.

Roll size:
1.50x20mt = €46

1.50x40mt = €75

2.10x100mt = €180

* Other sizes or thicknesses consult

Anti-weed textile mesh, made of polypropylene.

Resistant to dry rot and fungal attacks.

It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

2x100mt

Special pegs for artificial turf.

Pack of 100 units.

• Silica sands are the most ecological and natural in Spain, free of chemical products (amines and hydrofluoric acid) and without salinity. Washed exclusively with natural waters and dried with biomass.
• They are characterized by being aeolian, round or spheroid sands, without edges, allowing the product not to cake or compact, facilitating drainage. Granulometries: 0.2-0.5s/ 25kg

SILICA PALLET 1,200kg – 48sacksx25kg

Seaming tape for lawn installation.

0.30x25mt roll.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

Ratchet for tensioning the paddle tennis net

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

Manual roller for tennis courts and sports fields.

Working width 90 cm.

Empty weight 60 kg, with water filling 180 kg,

One-piece roller with rounded edges.

Without counterweights (The same model is also manufactured with counterweights)

Roller with built-in cleaning brush.

Capacity 330L

Working width 1MT.

Painted with oven drying.

Stainless bearings.

For manual use or for multi-tool.

WIDE YELLOW BRUSH 1MT

Wooden support 1040x65mm

1.2mm polyprotylene bristles

Galician wood handle attached with metal clip.

Working width 1mt.

To remove dirt after rain.

• Accessory to attach to Tromber
• Rigid nylon bristles.
• Aluminum support
• 2mt working width.
• To remove dirt after rain.
• Paddle court brushing.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Reinforced polyester guide center and Universal embroidery

• Aluminum carabiner.

Metal regulating buckles.

Set of round tennis posts ø 83 mm.

Color: Aluminum

• Special aluminum profile with a wall thickness of 3.5 mm, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum key for easy tensioning of the tennis net.

Plug-in cast aluminum cover with safety chain.

Total length of posts 142 cm.

Weight 10.5 kg.

Aluminum anchor sheath, insertion depth of 35 cm with cast aluminum cover. GS tested according to DIN EN 1510.