Anti-freeze pallet

Fixing bracket with 2 hooks for hanging hand brushes, mats, etc.

Made of steel, green, plastic-coated for Ø 60 mm posts.

Support: Galician pine wood

Fiber: 1.2mm strong black PVC

Sewn: With galvanized wire

• Galician wood handle 1.2 meters long, adjusted with metal clamp

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

Aluminum profile

Aluminum arch handle

High-strength rigid rubber

Working width: 200cm.

– For water collection

– To remove grit from the court

– For working damp soil.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

Rubber foam roller with handle.

• To remove puddles
• Working width 90cm

Aluminum handle with hanging hook

Aluminum toothed scraper

Wooden handle

Working width 70cm

• * Replacement saws available

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

Equipped with a new anti-injury system for net placement, guide rod instead of hook.

All our hoops have the same wheelbase, 7 cm high x 8.50 cm wide.

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

Ratchet for tensioning the paddle tennis net

Fixing bracket with 2 hooks for hanging hand brushes, mats, etc.

Made of steel, green, plastic-coated for Ø 60 mm posts.

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

• Accessory to attach to Tromber
• Rigid nylon bristles.
• Aluminum support
• 2mt working width.
• To remove dirt after rain.
• Paddle court brushing.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Reinforced polyester guide center and Universal embroidery

• Aluminum carabiner.

Metal regulating buckles.

Accessory for Tromber_tenis, Multiherramienta or manual use

Roller with cleaning brush.

Capacity 330L

Working width 1MT.

Painted with oven drying.

Stainless steel bearings.