Anti-freeze pallet

Bucket with galvanized grid and sponge with aluminum handle.

To absorb small puddles on the court.

There is a replacement for the foam

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

1.2mm prolipoptrilene bristles.

Arch-shaped handles and aluminum profile.

2mt working width.

To remove dirt after rain.

For brushing the court.

• * IDEAL TOOL FOR TROMBER TENNIS

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

Nylon fiber brush.

Galvanized and painted iron handle.

Easy to use.

Lightweight and easy to handle.

Sweeps the width of the line.

Detachable: Spare parts are available.

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

Rigid plastic support.

Galician wood handle

U-shaped folded rubber.

Working width: 75cm.

– To remove grit from the court

– Used to work damp soil.

– Padel court glass cleaner

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

Set of elements for the installation of the batter’s plate.

• Scoreboard with 6 rotating plates, for 3 sets.

Good visibility, can be read from both sides, clear, simple and easy-to-read design.

Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.

Stable aluminum stand, with support rod for the scoreboard and a large refillable plastic base.

Scoreboard size: 65×95 cm with 12 cm high numbers.

* International lettering: HOME/GUEST.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

• Models: 10 and 15 cm
• Models with stainless steel riser: 10 and 15 cm
• Arc setting: 50 to 360 degrees
• Factory-installed rubber cover
• Top-adjustable arc
• Quick arc verification mechanism
• Water-lubricated gear drive
• Nozzle types: 12
• Nozzle models: #4 to #2
• Warranty period: 5 years

Made with High Tenacity Polypropylene Thread

4mm thick net, 43mm mesh width

White polyester top band

Black polyester tape on the sides and bottom of the net.

Two hooks on each side composed of plastic tensioner and 5mm tension cord.

06mm plasticized steel cable and Fiberglass rods inserted on the sides

High Tenacity Polypropylene Thread

4mm thick net, 43mm mesh width.

White Polyester Top Band

Polyester tape on the sides and black trim on the bottom

One eyelet in each corner of the net and 3mm double tension cord.

6mm plasticized steel cable

• Set of square posts, 80 x 80 mm.

Color: Aluminum

• Special profile of reinforced aluminum with groove to hold the net retaining rod.
• Internal trapezoid tension mechanism with aluminum wrench for easy net tensioning.
• Cast aluminum clip-on cover that includes safety chain.
• Total length of posts: 142 cm. Weight: 10.5 kg.

Aluminum anchoring sleeves, insertion depth 35 cm, complete with cast aluminum cover. Complies with European safety standard DIN EN 1510.