Atlas Fountain

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

Net set for 2 11-a-side football goals.

Mesh made with polypropylene thread, various colors to choose from.

Mesh thickness: 3 – 3.50 – 4 – 4.5 – 5mm.

120mm square or hexagonal mesh.

Available in different sizes.

* Catalog attached – Request a quote

Size 110x195cm

Text in Spanish: VISITANTE/LOCAL

Possibility of adding the club’s logo for free.

• Easy and quick installation.

Weatherproof PVC.

They can remain outdoors and require very little maintenance…

Flexible profile made of hard PVC, white color

Transverse grooves 4 mm wide, at 28 mm intervals.

18 pieces of anchor pipe

4 rolls of 24 m = 4 cm

1 roll of 22 m = 5 cm wide

• 1 roll of 30 m = 5 cm wide
• Material needed for the installation of a court, which can be done by one person
• * The use of hard PVC and cross slits results in excellent anchoring with the surface of the court.

Aluminum profile.

Aluminum handle

High-strength rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– For working damp soil.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15mts.

Wooden ruler

Working width: 2 mts.

Very light.

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

Scraper for scraping compacted soil.

Galvanized iron teeth

Working width 1mt

• * Iron teeth replacement available

Made with High Tenacity Polypropylene Thread

4mm thick net, 43mm mesh width

White polyester top band

Black polyester tape on the sides and bottom of the net.

Two hooks on each side composed of plastic tensioner and 5mm tension cord.

06mm plasticized steel cable and Fiberglass rods inserted on the sides

Bimbi children’s tennis set of 6.10 m for small court, with 4 Topspin tennis rackets of 60 cm and 12 Bimbi Easy balls.

Size: 6.10 m x 0.85 m

The net system can be set up and dismantled very quickly using a practical connection system.

The net is simply placed on the two supports.

Net tension adjustable to 5 measurements.

Storage bag attached.

Size: 6.10mx 0.85m