Atlas Fountain

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

Introducing the MODO10 Chair, a piece of furniture that combines style and comfort with high-quality materials. Its anodized aluminum (AG3) legs not only provide strength and durability but also add a modern touch to the design. The seat surface is made up of 7 tropical wood slats of 35x110x700 mm, providing an ergonomic and pleasant seat.

With an open-pore varnish finish, the MODO10 Chair highlights the natural beauty of the wood and protects it against the effects of daily use. The stainless steel screws not only add an aesthetic touch but also guarantee corrosion resistance, prolonging the life of the chair.

With dimensions of 700.00 mm long, 648.00 mm wide, and 794.00 mm high, this chair is ideal for modern and versatile spaces. Whether in your dining room, office, or as an elegant addition outdoors, the MODO10 Chair offers not only functionality but also an attractive and durable design.

• BEACH VOLLEYBALL COMPETITION

-Measurement: 1.80×1.20×0.70×0.70

-Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.

-5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.

-Blue tape on the lower part.

-Tension cords on the upper and lower sides.

* Also available: beach volleyball training net.

• Semi-vandal-proof outdoor table. 7 mm stratified resin board with strong metal bars that allow the joining of the two boards. Metal profile around the entire perimeter. Zinc-plated metal net. Metal legs lacquered in polyester paint in a V shape for greater resistance (includes screws to anchor to the ground). Dimensions 2740 x 1525 x 760 mm. weight 80 kg.

• Scoreboard with 6 rotating plates, for 3 sets.

Good visibility, can be read from both sides, clear, simple and easy-to-read design.

Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.

Stable aluminum stand, with support rod for the scoreboard and a large refillable plastic base.

Scoreboard size: 65×95 cm with 12 cm high numbers.

* International lettering: HOME/GUEST.

• Very stable ball cart, easy to drive due to its large wheels. Large basket, as well as additional storage tray. Chrome-plated metal rod structure. Black color.
• OPTIONAL: Separation grid US430215 (Price €8)

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

Weight: 7.5 kg

Supported weight: 240 kg

• Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

Seat: 150 x 37 cm – Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 6 feet of plastic and 12 multi-chamber profile slats, 4 posts.

They are manufactured in white and green.

Weight: 24.20kg

Supported weight: 360kg

Width: 200cm x Depth: 64cm x Height: 80cm

• Seat: 200 x 45cm Backrest height: 40 cm Seat height: 45 cm

.2 years warranty

Manufactured in Germany

• Galvanized ratchet tensioner with fastening anchors and special straps for tensioning the Speziala tennis line.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15mts.

Wooden ruler

Working width: 2 mts.

Very light.

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available