Atlas Fountain

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

Anti-weed textile mesh, made of polypropylene.

Resistant to dry rot and fungal attacks.

It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

2x100mt

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, black polyester trim on the sides and bottom of the net. An eyelet in each upper corner of the net and 3mm double tension cord. 5mm plastic-coated steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

• Tennis net in 4mm thick polypropylene with upper PVC tape and lateral and lower reinforcements, customized with screen printing, with the logo provided by the client.

Minimum 10 units.

• Scoreboard with 6 rotating plates, for 3 sets.

Good visibility, can be read from both sides, clear, simple, and easy-to-read design.

Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.

Easy to attach to the fence or net. With fence attachment.

Size: 65x95cm with 12 cm high numbers.

* International lettering: HOME/GUEST.

Ratchet for tensioning the paddle tennis net

• Very stable ball cart, easy to drive due to its large wheels. Large basket, as well as additional storage tray. Chrome-plated metal rod structure. Black color.
• OPTIONAL: Separation grid US430215 (Price €8)

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

Weight: 7.5 kg

Supported weight: 240 kg

• Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

Seat: 150 x 37 cm – Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male