Atlas Fountain

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

Anti-weed textile mesh, made of polypropylene.

Resistant to dry rot and fungal attacks.

It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

2x100mt

Manual roller for tennis courts and sports fields.

• Working width 90 cm.

Empty weight 60 kg, with water filling 180 kg

• Divided roller body, which facilitates turning.
• Without counterweights. (Also manufactured with counterweights)

Flexible profile made of hard PVC, white color

Transverse grooves 4 mm wide, at 28 mm intervals.

18 pieces of anchor pipe

4 rolls of 24 m = 4 cm

1 roll of 22 m = 5 cm wide

• 1 roll of 30 m = 5 cm wide
• Material needed for the installation of a court, which can be done by one person
• * The use of hard PVC and cross slits results in excellent anchoring with the surface of the court.

Replacement court sweeper. 90cm

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

• .• Model: 10 cm
• Sector configuration: from 40° to 360°
• Factory-installed rubber cover
• Top-side sector adjustment
• Quick sector verification mechanism
• Water-lubricated gear drive
• Nozzle types: 27 in total
• Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
• Warranty period: 2 years

It is an electric skate, small in size, customizable,

optimal for performing tennis court maintenance services

.

Its rear anchor allows the following tools to be adapted:

• Mat
• Wide yellow brush
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer

Set of round tennis posts ø 83 mm.

Color: Aluminum

• Special aluminum profile with a wall thickness of 3.5 mm, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum key for easy tensioning of the tennis net.

Plug-in cast aluminum cover with safety chain.

Total length of posts 142 cm.

Weight 10.5 kg.

Aluminum anchor sheath, insertion depth of 35 cm with cast aluminum cover. GS tested according to DIN EN 1510.

• Set of square posts, 80 x 80 mm.

Color: Aluminum

• Special profile of reinforced aluminum with groove to hold the net retaining rod.
• Internal trapezoid tension mechanism with aluminum wrench for easy net tensioning.
• Cast aluminum clip-on cover that includes safety chain.
• Total length of posts: 142 cm. Weight: 10.5 kg.

Aluminum anchoring sleeves, insertion depth 35 cm, complete with cast aluminum cover. Complies with European safety standard DIN EN 1510.

• Set of square posts, 80 x 80 mm.

Color: Green, White, black and blue.

Special profile of reinforced aluminum with groove to hold the net retaining rod.

Internal trapezoid tension mechanism with aluminum wrench for easy net tensioning.

Cast aluminum clip-on cover that includes safety chain.

Total length of posts: 142 cm. Weight: 10.5 kg.

• Aluminum anchoring sleeves, insertion depth 35 cm, complete with cast aluminum cover. Complies with European safety standard DIN EN 1510.