BB Tierra pastilla TR

FEATURES

• Orange color
• Controlled particle size
• Screening range of impalpable minimum dimension and 1.40 mm diameter.
• Uniformity in raw material
• From homogeneous quality baked red brick
• Average humidity 2.50%.
• PALLET OF 1000KG 50 bags of 20kg.

FEATURES

• Screening range 0/1mm.
• Screening with 10% Grain and 90% fines
• From 800º baked brick with homogeneous ceramic color
• Recommended to create a layer on the base and retain maximum moisture.
• IDEAL FOR SUMMER
• 1000KG BIG BAG

FEATURES

• Screening range 0/1mm.
• Screening with 10% Grain and 90% fines
• From 800º baked brick with homogeneous ceramic color
• IDEAL FOR SUMMER
• Recommended to create a layer on the base and retain maximum moisture.
• PALLET OF 1200KG 60 bags of 20kg.
• Non-returnable pallet included

FEATURES

• – Screening range from impalpable minimum dimension and 1mm diameter.

– From quarry stone blasting

• – Average humidity 3.50%
• – Contains approximately 90% silica – Red/purple color
• 1000KG BIG BAG BAGGED

FEATURES

• Screening range 0/2mm.
• Screening with 10% Grain and 90% fines
• From 800º baked brick with homogeneous ceramic color
• IDEAL FOR SUMMER
• Recommended to create a layer on the base and retain maximum moisture.
• 1000KG BIG BAG

FEATURES:

Orange color
Controlled particle size

• Screening range diameter 0-1.40 mm.

Uniformity in the raw material
From homogeneous quality baked red brick BIG BAG OF 1000KG
THE CLASSIC…….. FOR YEAR-ROUND USE

FEATURES

• Screening range 0/2mm.
• Screening with 10% Grain and 90% fines
• From 800º baked brick with homogeneous ceramic color
• IDEAL FOR SUMMER
• Recommended to create a layer on the base and retain maximum moisture.
• PALLET OF 1200KG 60 bags of 20kg.
• Non-returnable pallet included

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• The Tennis Tutor PLUS ball machine is battery operated.

It is as portable as a suitcase.

The ball speed is adjustable from a light launching ball for beginners, to a high-speed ball for advanced players.

The trajectory can be set between the net and the baseline, regular ball sequence and arbitrary dispersion angle.

Technical data:

Ball capacity: 150 balls

Dimensions (HxWxD): 51 x 50 x 50 cm

Weight: 21.6 kg

Power connection: Battery operation (charging current 230 V)

Playing time: 4-6 hours

Recharge time: 12 hours

Feed interval: 1.5-10 sec.

Maximum speed: 136 km/h

Trajectory: short – long adjustable

Ball type: Top Spin, Spin, Flat, Cut

Dispersion angle: 1 direction and random

Material: plastic

Remote control: yes, on/off

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

Absorbent drum with foam covering.

• Structure and body of the drum, hot-dip galvanized.
• Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

Working width 80 cm.

For filling holes and leveling irregularities.

Working width 100 cm wide.

With wooden handle.

Accessory for Tromber_tenis made of highly resistant rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– To work the damp soil.

• Accessory to attach to Tromber
• Rigid nylon bristles.
• Aluminum support
• 2mt working width.
• To remove dirt after rain.
• Paddle court brushing.

Reinforced polyester guide center and Universal embroidery

• Aluminum carabiner.

Metal regulating buckles.

Accessory for Tromber_tenis, Multiherramienta or manual use

Roller with cleaning brush.

Capacity 330L

Working width 1MT.

Painted with oven drying.

Stainless steel bearings.

• The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
• The milled material is ejected and can be transported in wheelbarrows with little effort.

The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

• The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

• It adapts to all access doors and can be easily operated by a single person.

TECHNICAL DETAILS:

• – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

– Length: approx. 800 mm

– Width: approx. 850 mm.

– Height: approx. 1000 mm

– Milling width: approx. 655 mm

– Weight: approx. 75 kg

* Honda engine warranty