BCN fitting for lance or nozzle

11,00 
SKU: 040110/11

BCN fitting for lance or nozzle

  • Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

You may also be interested in

  • Wet system manual irrigation system

    Request a quote

    Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

  • LNK WiFi irrigation system for clay courts

    Request a quote

    Control the irrigation of your court from your mobile (Wi-Fi) with programming by sectors, adjustable times and flow rates, and manual activation option. Homogeneous coverage on clay, easy installation and maintenance. Request information. Custom projects.

  • Viper VTE-1550 GW red nozzle

    27,50 

    Lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications.

    Jet, mist and shut-off effects

    Fixed teeth

    Made of impact-resistant ABS

    Effective range 25mts jet effect @ 7 bar

    Compatible for UNE23400 1” connection

    • Weight: 0.020 kg
    • Length: 13 cm

    Fitting not included

    • Recommended hose line: 25.4 mm
  • Viper STI 30v 1 metal nozzle

    151,80 

    Nozzle-lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications

    Jet, mist and shut-off effects

    From JET to MIST position in only 180º

    Effective range 24mts jet effect @ 7 bar

    Compatible for UNE23400 connection .

  • MAXI-PAW Sprinkler

    60,50 

    Range: 6.7 to 13.7 meters.
    Pressure: 1.7 to 4.1 bar.
    Flow rate: 0.34 to 1.91 m3/h.

    • Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

    Female side inlet: ½” (15/21)
    Trajectory angle:

    23° for nozzles No. 06, 07, 08, 10 and 12
    11° for nozzles 07-LA and 10-LA

    • MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
    • Low angle nozzles: 07-LA (black), 10-LA (yellow)
  • Solenoid valve pgv mb 1.5

    83,60 
  • Ragno Acqua 15bar watering hose

    286,00 

    Flexible hose made of plasticized food-grade PVC, with polyester textile reinforcement embedded in TPU resin, mechanically strong, blue exterior. Does not stain pavements when rubbed. Resistant to detergents, disinfectant solutions and low-content fats. Resistant to atmospheric agents. Working temperature: -5ºC to +60ºC

    Price per 50 meters.

  • BCN fitting with pipe

    12,10 

    1″ Barcelona aluminum fitting for connection to irrigation hose.

What you’ve seen…

  • Volleyball net

    Request a quote

    Made with high-tenacity polypropylene thread.

    • 3mm thick net, 100mm mesh width.
    • Black polyester top band on the sides and at the bottom of the net.
    • Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
    • 0.6mm plastic-coated steel cable.
    • Fiberglass rods inserted on the sides.
    • Also available with PVC top tape and for High Competition.
  • Oslo Bench – Various sizes

    324,50 
    • The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
    • The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

    All the screws are made of stainless steel.
    Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

  • Semi-circular trash can 40L

    115,50 
    • Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

    Measurements: 455mm diameter, 605mm total height.

    Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

  • 2-space bicycle rack

    112,20 
    • Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

    Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

  • Munich Bench 1.50mt

    132,00 
    • High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
    • 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

    Weight: 7.5 kg

    Supported weight: 240 kg

    • Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

    Seat: 150 x 37 cm – Seat height: 41.5 cm

    • 2 years warranty

    (Manufactured in Germany)

  • BCN fitting for lance or nozzle

    11,00 
    • Barcelona 1″ threaded aluminum fitting for lance or nozzle.

    Female or male

  • Roller with brush

    2.310,00 

    Accessory for Tromber_tenis, Multiherramienta or manual use

    Roller with cleaning brush.

    Capacity 330L

    Working width 1MT.

    Painted with oven drying.

    Stainless steel bearings.

  • Guide center with plastic buckle

    11,00 
    • Polyester guide center
    • Aluminum carabiner.

    Plastic adjusting buckle