BCN fitting with pipe

Nozzle-lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications

Jet, mist and shut-off effects

From JET to MIST position in only 180º

Effective range 24mts jet effect @ 7 bar

Compatible for UNE23400 connection .

• Models: 10 and 15 cm
• Models with stainless steel riser: 10 and 15 cm
• Arc setting: 50 to 360 degrees
• Factory-installed rubber cover
• Top-adjustable arc
• Quick arc verification mechanism
• Water-lubricated gear drive
• Nozzle types: 12
• Nozzle models: #4 to #2
• Warranty period: 5 years

Lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications.

Jet, mist and shut-off effects

Fixed teeth

Made of impact-resistant ABS

Effective range 25mts jet effect @ 7 bar

Compatible for UNE23400 1” connection

• Weight: 0.020 kg

• Length: 13 cm

Fitting not included

• Recommended hose line: 25.4 mm

• .• Model: 10 cm
• Sector configuration: from 40° to 360°
• Factory-installed rubber cover
• Top-side sector adjustment
• Quick sector verification mechanism
• Water-lubricated gear drive
• Nozzle types: 27 in total
• Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
• Warranty period: 2 years

Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

Flexible hose made of plasticized food-grade PVC, with polyester textile reinforcement embedded in TPU resin, mechanically strong, blue exterior. Does not stain pavements when rubbed. Resistant to detergents, disinfectant solutions and low-content fats. Resistant to atmospheric agents. Working temperature: -5ºC to +60ºC

Price per 50 meters.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

Description: Alvium model bench made of high-quality polyethylene (MDPE).

Material: Medium density polyethylene (MDPE).

CHARACTERISTICS:

– Ecological and recyclable.

– Anti-graffiti and easy to clean.

– Maintenance-free.

– Economical and durable.

– UV treated.

– High robustness.

– Available in various colors

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

• Galvanized ratchet tensioner with fastening anchors and special straps for tensioning the Speziala tennis line.

Aluminum rake with soft rubber teeth

Wooden handle.

For collecting leaves and surface dirt from the court.

Width: 75cm.

• Superior quality aluminum umpire chair, powder-coated, GS tested according to DIN EN 131.
• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Propiprotileno mesh, custom-made, with perimeter finish.

Color, thickness, and size to choose.

• Protection and safety nets for sports fields, prevent balls from hitting spectators or leaving the premises, and protect buildings near the sports area.

Price to be determined, according to size and thickness

Bimbi children’s tennis set of 3.10 m for small court, with 2 Topspin 60 cm tennis rackets and 6 Bimbi Easy balls.

Measurement: 3m 0.85 m

Bimbi children’s tennis set of 6.10 m for small court, with 4 Topspin tennis rackets of 60 cm and 12 Bimbi Easy balls.

Size: 6.10 m x 0.85 m