BCN fitting with pipe

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

• Models: 10 and 15 cm
• Models with stainless steel riser: 10 and 15 cm
• Arc setting: 50 to 360 degrees
• Factory-installed rubber cover
• Top-adjustable arc
• Quick arc verification mechanism
• Water-lubricated gear drive
• Nozzle types: 12
• Nozzle models: #4 to #2
• Warranty period: 5 years

Lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications.

Jet, mist and shut-off effects

Fixed teeth

Made of impact-resistant ABS

Effective range 25mts jet effect @ 7 bar

Compatible for UNE23400 1” connection

• Weight: 0.020 kg

• Length: 13 cm

Fitting not included

• Recommended hose line: 25.4 mm

Flexible hose made of plasticized food-grade PVC, with polyester textile reinforcement embedded in TPU resin, mechanically strong, blue exterior. Does not stain pavements when rubbed. Resistant to detergents, disinfectant solutions and low-content fats. Resistant to atmospheric agents. Working temperature: -5ºC to +60ºC

Price per 50 meters.

• .• Model: 10 cm
• Sector configuration: from 40° to 360°
• Factory-installed rubber cover
• Top-side sector adjustment
• Quick sector verification mechanism
• Water-lubricated gear drive
• Nozzle types: 27 in total
• Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
• Warranty period: 2 years

Control the irrigation of your court from your mobile (Wi-Fi) with programming by sectors, adjustable times and flow rates, and manual activation option. Homogeneous coverage on clay, easy installation and maintenance. Request information. Custom projects.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 6 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 4 posts are manufactured in white or green,
• Weight: 9.9 kg

Weight supported: 320 kg

• Dimensions: Width: 200cm x Depth: 37cm x Height: 41.5cm

Seat: 200 x 37 cm x Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.

6 plastic feet and 9 multi-chamber profile slats, 4 positions.

They are manufactured in white and green.

Weight: 16.90 kg

Weight supported: 320kg

• Width: 200cm x Depth 54 cm x Height: 74cm.
• Seat: 200 x 38cm Backrest height: 35cm Seat height: 44cm.

2 years warranty

Manufactured in Germany

Roller with built-in cleaning brush.

Capacity 330L

Working width 1MT.

Painted with oven drying.

Stainless bearings.

For manual use or for multi-tool.

Aluminum profile

Aluminum arch handle

High-strength rigid rubber

Working width: 200cm.

– For water collection

– To remove grit from the court

– For working damp soil.

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

• .• Model: 10 cm
• Sector configuration: from 40° to 360°
• Factory-installed rubber cover
• Top-side sector adjustment
• Quick sector verification mechanism
• Water-lubricated gear drive
• Nozzle types: 27 in total
• Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
• Warranty period: 2 years

Shade/privacy screen, provides privacy and protects from the wind.
Various densities and colors, rolls of different heights and lengths

Produced in a raschel system, non-fraying product, composed of high-density HDPE monofilament and polyethylene raffia tape.

Facilitates privacy in outdoor work.

It can be adapted to the required size due to its easy cutting.

• Option of custom manufacturing with eyelets.

Fabric very resistant to fraying.

With UV treatment for 2 years of protection.

Mesh manufactured in Spain.

Adapter accessory for roller and brush.

With seat

Support pedals.

Easy assembly.