BCN fitting with pipe

Control the irrigation of your court from your mobile (Wi-Fi) with programming by sectors, adjustable times and flow rates, and manual activation option. Homogeneous coverage on clay, easy installation and maintenance. Request information. Custom projects.

• .• Model: 10 cm
• Sector configuration: from 40° to 360°
• Factory-installed rubber cover
• Top-side sector adjustment
• Quick sector verification mechanism
• Water-lubricated gear drive
• Nozzle types: 27 in total
• Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
• Warranty period: 2 years

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications.

Jet, mist and shut-off effects

Fixed teeth

Made of impact-resistant ABS

Effective range 25mts jet effect @ 7 bar

Compatible for UNE23400 1” connection

• Weight: 0.020 kg

• Length: 13 cm

Fitting not included

• Recommended hose line: 25.4 mm

Nozzle-lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications

Jet, mist and shut-off effects

From JET to MIST position in only 180º

Effective range 24mts jet effect @ 7 bar

Compatible for UNE23400 connection .

Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

• BEACH VOLLEYBALL COMPETITION

-Measurement: 1.80×1.20×0.70×0.70

-Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.

-5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.

-Blue tape on the lower part.

-Tension cords on the upper and lower sides.

* Also available: beach volleyball training net.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 6 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 4 posts are manufactured in white or green,
• Weight: 9.9 kg

Weight supported: 320 kg

• Dimensions: Width: 200cm x Depth: 37cm x Height: 41.5cm

Seat: 200 x 37 cm x Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

Rubber foam roller with handle.

• To remove puddles
• Working width 90cm

Aluminum handle with hanging hook

Aluminum profile

Aluminum arch handle

High-strength rigid rubber

Working width: 200cm.

– For water collection

– To remove grit from the court

– For working damp soil.

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

Metal mesh sieve or screen.

Various mesh thicknesses from 1.40 to 6.10mm.

To achieve perfect homogenization of the clay court.

Shade/privacy screen, provides privacy and protects from the wind.
Various densities and colors, rolls of different heights and lengths

Produced in a raschel system, non-fraying product, composed of high-density HDPE monofilament and polyethylene raffia tape.

Facilitates privacy in outdoor work.

It can be adapted to the required size due to its easy cutting.

• Option of custom manufacturing with eyelets.

Fabric very resistant to fraying.

With UV treatment for 2 years of protection.

Mesh manufactured in Spain.

Titan 240W LED Projector, Lumileds LED, 40,800 lumens, 170 lm/w, 5000K, IP66, IK08, CRI+70, asymmetric optics Titan 150W LED Projector, Philips LED, 22,500 lumens 150 lm/w, 5000K, IP66, IK08, CRI+70, asymmetric optics