Beach volleyball net
Beach volleyball net
- BEACH VOLLEYBALL COMPETITION
-Measurement: 1.80×1.20×0.70×0.70
-Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.
-5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.
-Blue tape on the lower part.
-Tension cords on the upper and lower sides.
* Also available: beach volleyball training net.
You may also be interested in
Volleyball net
Request a quoteMade with high-tenacity polypropylene thread.
- 3mm thick net, 100mm mesh width.
- Black polyester top band on the sides and at the bottom of the net.
- Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
- 0.6mm plastic-coated steel cable.
- Fiberglass rods inserted on the sides.
- Also available with PVC top tape and for High Competition.
80x80mm Square Aluminum Volleyball Post
616,00 €Solid square volleyball posts made of 80 x 80mm aluminum.
The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.
Surface of the posts and sliding profiles anodized in matte silver.
Anchoring sockets are attached.
Round aluminum volleyball post D/80mm
594,00 €Solid round volleyball posts, 80 x 80mm, made of aluminum.
The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.
Surface of the posts and sliding profiles anodized in matte silver.
Anchoring sleeves are attached.
Set of fixed metal volleyball posts adjustable for tennis
407,00 €Posts made of 80 mm round steel, designed to be anchored to the ground
using metal canisters -not included-. Includes tensioning ratchet to tighten the net cable to be placed, in
the upper part they have the net height adjustment system, which allows playing volleyball in its different categories and by
lastly the lower part is provided with the corresponding hitches for the practice of tennis. Post measurements:
280cm
What you’ve seen…
Delta Bench – Various sizes
700,70 €The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.
Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.
Stainless steel screws.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
NeoBarcino Bench – Various sizes
401,50 €Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.
It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.
We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.
THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.
The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a
optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and
impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of
gray-hammered polyester powder paint.
The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.
All the screws are made of stainless steel.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
Front paddle protection net 2x14mt.
159,50 €3mm knotless propiprotileno mesh, made with perimeter finish.
Installation not included.Size: 2x14mt
Color: black.
Helgoland Bench 1.50m
225,50 €- 150 cm long PVC/PP bench, reinforcement angle in the middle, high seating comfort, detachable,
- high strength, easy maintenance and cleaning, and great stability.
4 plastic feet and 12 multi-chamber profile slats
Manufactured in white or green
Weight: 19 kg
- 2 years warranty
(Made in Germany)
SPECIAL US I Manual Roller
808,50 €Manual roller for tennis courts and sports fields.
Working width 90 cm.
Empty weight 60 kg, with water filling 180 kg,
One-piece roller with rounded edges.
Without counterweights (The same model is also manufactured with counterweights)
STRIPER tracer spray paint
187,00 €Special paint for floors, highly resistant and with high pigmentation.
– Resistant to traffic, inclement weather, and hydrocarbons.
– Quick-drying paint.
– CFC and lead-free paint.
– 7 colors available.
Price per box of 12 unitsSweeping brush 50CM
16,50 €Support: Galician pine wood
Fiber: 1.2mm strong black PVC
Sewn: With galvanized wire
- Galician wood handle 1.2 meters long, adjusted with metal clamp
Court drying machine
1.705,00 €Absorbent drum with foam covering.
- Structure and body of the drum, hot-dip galvanized.
- Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.
Working width 80 cm.
Tromber_Tenis MAT
165,00 €Accessory for Tromber_Tenis multi-tool
2 Layers of fine mesh PVC material, with final finish
Length: 1.15 meters
Aluminum rule
Working width: 2 meters
Protective tape for game net
49,50 €Upper protection band, made of padded white polyester.
Extends the durability of the game net.














