Benson baseball pitching rubber

Set of 3 interlocking bases. Benson PSB

Set of elements for the installation of the batter’s plate.

In-ground pitcher’s rubber.

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

FEATURES

• Mixture of volcanic and selected aggregates, with high compaction and water absorption
• Reddish color
• Screening range 0.4 m/m
• Excellent compaction on the court with progressive hardening without glazing of the surface
• Facilitates the grip of the clay court layer
• 1000KG BIG BAG

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Set of weights for portable net posts, for professional competitions.

1 set consists of 4 weights, each of 10 kg.