BLACK ANTI-WEED MESH 1.50x20mt 130grs.

50,60 
SKU: 60208

BLACK ANTI-WEED MESH 1.50x20mt 130grs.

Textile anti-weed mesh, made of polypropylene.

It is applied as an anti-weed sheet, for artificial grass base, professional growers, gardeners.

Roll size:
1.50x20mt = €46

1.50x40mt = €75

2.10x100mt = €180

* Other sizes or thicknesses consult

You may also be interested in

  • Seaming tape for lawn

    13,20 

    Seaming tape for lawn installation.

    0.30x25mt roll.

  • Two-component adhesive 5kg.

    27,50 

    Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

    5KG can.

    The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

    All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

  • Brown anti-weed textile mesh 2x100mt

    282,70 

    Anti-weed textile mesh, made of polypropylene.

    Resistant to dry rot and fungal attacks.

    It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

    2x100mt

  • Two-component adhesive 12KG

    52,80 

    Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

    12KG can.

    The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

    All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

  • Adhesive joint tape 0.15x25mt

    63,80 

    Joint tape for the installation of turf.

    0.15x25mt roll.

  • Silica Sand PL 1200KG

    165,00 
    • Silica sands are the most ecological and natural in Spain, free of chemical products (amines and hydrofluoric acid) and without salinity. Washed exclusively with natural waters and dried with biomass.
    • They are characterized by being aeolian, round or spheroid sands, without edges, allowing the product not to cake or compact, facilitating drainage. Granulometries: 0.2-0.5s/ 25kg

    SILICA PALLET 1,200kg – 48sacksx25kg

  • Lawn installation peg

    396,00 

    Special pegs for artificial turf.

    Pack of 100 units.

What you’ve seen…

  • Lateral paddle tennis protection net 3x16mt.

    143,00 

    3mm knotless polypropylene mesh, manufactured, with perimeter finish.

    Size: 3x16mt

    Color: black.

  • Red court clay pallet 0.01

    275,00 

    FEATURES

    • Screening range 0/1mm.
    • Screening with 10% Grain and 90% fines
    • From 800º baked brick with homogeneous ceramic color
    • IDEAL FOR SUMMER
    • Recommended to create a layer on the base and retain maximum moisture.
    • PALLET OF 1200KG 60 bags of 20kg.
    • Non-returnable pallet included
  • SPECIAL US I Manual Roller

    808,50 

    Manual roller for tennis courts and sports fields.

    Working width 90 cm.

    Empty weight 60 kg, with water filling 180 kg,

    One-piece roller with rounded edges.

    Without counterweights (The same model is also manufactured with counterweights)

  • Yellow Brush 1MT

    42,90 

    WIDE YELLOW BRUSH 1MT

    Wooden support 1040x65mm

    1.2mm polyprotylene bristles

    Galician wood handle attached with metal clip.

    Working width 1mt.

    To remove dirt after rain.

  • HUNTER PGP-10CM Sprinkler

    33,00 
    • .• Model: 10 cm
    • Sector configuration: from 40° to 360°
    • Factory-installed rubber cover
    • Top-side sector adjustment
    • Quick sector verification mechanism
    • Water-lubricated gear drive
    • Nozzle types: 27 in total
    • Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
    • Warranty period: 2 years
  • MAXI-PAW Sprinkler

    60,50 

    Range: 6.7 to 13.7 meters.
    Pressure: 1.7 to 4.1 bar.
    Flow rate: 0.34 to 1.91 m3/h.

    • Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

    Female side inlet: ½” (15/21)
    Trajectory angle:

    23° for nozzles No. 06, 07, 08, 10 and 12
    11° for nozzles 07-LA and 10-LA

    • MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
    • Low angle nozzles: 07-LA (black), 10-LA (yellow)