Brown anti-weed textile mesh 2x100mt

Special pegs for artificial turf.

Pack of 100 units.

Seaming tape for lawn installation.

0.30x25mt roll.

Joint tape for the installation of turf.

0.15x25mt roll.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Textile anti-weed mesh, made of polypropylene.

It is applied as an anti-weed sheet, for artificial grass base, professional growers, gardeners.

Roll size:
1.50x20mt = €46

1.50x40mt = €75

2.10x100mt = €180

* Other sizes or thicknesses consult

• Silica sands are the most ecological and natural in Spain, free of chemical products (amines and hydrofluoric acid) and without salinity. Washed exclusively with natural waters and dried with biomass.
• They are characterized by being aeolian, round or spheroid sands, without edges, allowing the product not to cake or compact, facilitating drainage. Granulometries: 0.2-0.5s/ 25kg

SILICA PALLET 1,200kg – 48sacksx25kg

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Anti-weed textile mesh, made of polypropylene.

Resistant to dry rot and fungal attacks.

It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

2x100mt

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

• Scoreboard with 6 rotating plates, for 3 sets.

Good visibility, can be read from both sides, clear, simple and easy-to-read design.

Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.

Stable aluminum stand, with support rod for the scoreboard and a large refillable plastic base.

Scoreboard size: 65×95 cm with 12 cm high numbers.

* International lettering: HOME/GUEST.

• The Playmate Volley Dream ball machine is a high-quality portable machine with an aluminum housing and battery supply. It meets the highest safety requirements. There is a sensor installed that immediately stops the ball projection if a person is in the immediate vicinity in the direction of departure. In addition, the new Volley Dream comes with a lockable lid, which must be locked for safety reasons in game mode.

It can be programmed in seven directions. For example: right, center, left, left right, right, center. Similarly, it plays topspin and smash, as well as short-long. The ball output can be adjusted from 6-60 balls per minute. An ideal device for individual or group training. Exact throwing accuracy and quiet operation. With the newly integrated “i-Playmate” attachment, you can use an app to control playmate i-Shmash via i-Phone or i-Pad, as well as record, document and compare your training achievements.
Technical data:

• Capacity: about 180 balls with the lid closed.
• Dimensions: (height x width x depth) 64 x 56 x 48 cm
• Weight: 31 kg
• Power connection: battery operation (charging current 230 V)
• Battery life: min 4 hours
• Charging time: 6 hours
• Maximum speed: 140 km / h
• Ball sequence: 1 – 10 sec.
• Trajectory: short-long, infinitely adjustable ball types top spin, slice
• Shot types: Topspin and smash
• Dispersion angle: 7 directions center-right
• Housing: aluminum with lockable lid
• Safety: Turn off sensors
• Remote control: wireless, on / off

Roller with built-in cleaning brush.

Capacity 330L

Working width 1MT.

Painted with oven drying.

Stainless bearings.

For manual use or for multi-tool.

Prefabricated white cement lines, with 2 galvanized iron rods inside.

Width 5 cm.

Length 1.20 meters.
Sold per unit.

Aluminum profile

Aluminum arch handle

High-strength rigid rubber

Working width: 200cm.

– For water collection

– To remove grit from the court

– For working damp soil.

• .• Model: 10 cm
• Sector configuration: from 40° to 360°
• Factory-installed rubber cover
• Top-side sector adjustment
• Quick sector verification mechanism
• Water-lubricated gear drive
• Nozzle types: 27 in total
• Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
• Warranty period: 2 years

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

Set of 2 wheels for power tiller with axle, served assembled to the power tiller.

Smooth tread tire.