Fine-toothed scraper

Absorbent drum with foam covering.

• Structure and body of the drum, hot-dip galvanized.
• Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

Working width 80 cm.

Nylon fiber brush.

Galvanized and painted iron handle.

Easy to use.

Lightweight and easy to handle.

Sweeps the width of the line.

Detachable: Spare parts are available.

Metal mesh sieve or screen.

Various mesh thicknesses from 1.40 to 6.10mm.

To achieve perfect homogenization of the clay court.

WIDE YELLOW BRUSH 1MT

Wooden support 1040x65mm

1.2mm polyprotylene bristles

Galician wood handle attached with metal clip.

Working width 1mt.

To remove dirt after rain.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

2 Layers of fine mesh PVC material, with a final finish

Length: 1.15m

Aluminum ruler

Working width: 3m

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

Rubber foam roller with handle.

• To remove puddles
• Working width 90cm

Aluminum handle with hanging hook

Set of nets for goals in high tenacity polypropylene, polyamide and polyester. They meet the requirements of the regulations applicable in each sport. Quick and easy installation. Great variety in thicknesses, meshes and colors. High tensile strength and UV resistant.

* Catalog attached – Request a quote.

Special pegs for artificial turf.

Pack of 100 units.

Made with high-tenacity polypropylene thread.

• 3mm thick net, 100mm mesh width.
• Black polyester top band on the sides and at the bottom of the net.
• Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
• 0.6mm plastic-coated steel cable.
• Fiberglass rods inserted on the sides.
• Also available with PVC top tape and for High Competition.

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

Set of 3 interlocking bases. Benson PSB

Equipped with a new anti-injury system for net placement, guide rod instead of hook.

All our hoops have the same wheelbase, 7 cm high x 8.50 cm wide.

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

Prefabricated white cement lines, with 2 galvanized iron rods inside.

Width 5 cm.

Length 1.20 meters.
Sold per unit.

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

• The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
• The milled material is ejected and can be transported in wheelbarrows with little effort.

The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

• The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

• It adapts to all access doors and can be easily operated by a single person.

TECHNICAL DETAILS:

• – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

– Length: approx. 800 mm

– Width: approx. 850 mm.

– Height: approx. 1000 mm

– Milling width: approx. 655 mm

– Weight: approx. 75 kg

* Honda engine warranty