Foam squeegee with bucket
Foam squeegee with bucket
Bucket with galvanized grid and sponge with aluminum handle.
To absorb small puddles on the court.
There is a replacement for the foam
You may also be interested in
1MT Aluminum Leveler-
71,50 €For filling holes and leveling irregularities.
Working width 100 cm wide.
With wooden handle.
Yellow Brush 1MT
42,90 €WIDE YELLOW BRUSH 1MT
Wooden support 1040x65mm
1.2mm polyprotylene bristles
Galician wood handle attached with metal clip.
Working width 1mt.
To remove dirt after rain.
Sieve or screen
49,50 €Metal mesh sieve or screen.
Various mesh thicknesses from 1.40 to 6.10mm.
To achieve perfect homogenization of the clay court.
Galvanized straightedge
46,20 €Galvanized iron square straightedge 50x50x2mm.
Length: 3 meters.
For leveling courts.
Essential for making baselines.
PVC Mat 2MT Wood – Fine double mesh
187,00 €2 Layers of fine mesh PVC material, with final finish
Length: 1.15mts.
Wooden ruler
Working width: 2 mts.
Very light.
3MT Wood PVC Mat – Fine double mesh
264,00 €2 Layers of fine mesh PVC material, with final finish
Length: 1.15 meters
Wooden rule
Working width: 3 meters
Court drying machine
1.705,00 €Absorbent drum with foam covering.
- Structure and body of the drum, hot-dip galvanized.
- Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.
Working width 80 cm.
Narrow steel wire brush, with 2mt arch.
231,00 €- For scraping tennis courts and removing leaves.
- Ideal tool for spring and autumn season.
- Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.
With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.
Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.
Length: 200 cm
Guide rod width: 5 cm
Guide rod height: 3 cm
- Bristle height; 7.5 cm
Bristle distance: approx. 1 cm
- Weight: approx. 5.7 kg
Working width 200 cm.
What you’ve seen…
Beach volleyball net
Demana pressupost- BEACH VOLLEYBALL COMPETITION
-Measurement: 1.80×1.20×0.70×0.70
-Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.
-5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.
-Blue tape on the lower part.
-Tension cords on the upper and lower sides.
* Also available: beach volleyball training net.
Oslo Bench – Various sizes
324,50 €- The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
- The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.
All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.Semi-circular trash can 40L
115,50 €- Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.
Measurements: 455mm diameter, 605mm total height.
Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.
White basketball net 6mm
8,80 €Set of 2 polyamide basketball nets.
6mm braided thread.
12 hooks
White color
* Also available in 4.5mm and 5mm.
Portable net post counterweights
407,00 €Set of weights for portable net posts, for professional competitions.
1 set consists of 4 weights, each of 10 kg.
Wrench for the tensioning mechanism
15,40 €Spare parts for tennis net posts – Wrench for tensioning mechanism
Internal post mechanism
93,50 €Tension mechanism for tennis net posts (internal)















