Front paddle protection net 2x10mt.

3mm knotless propiprotileno mesh, made with perimeter finish.
Installation not included.

Size: 2x14mt

Color: black.

• Tennis net in 4mm thick polypropylene with upper PVC tape and lateral and lower reinforcements, customized with screen printing, with the logo provided by the client.

Minimum 10 units.

3mm knotless polypropylene mesh, manufactured, with perimeter finish.

Size: 3x16mt

Color: black.

• Made with High Tenacity Polypropylene Thread
• 4mm thick net, 43mm mesh width.
• White PVC top band,
• Black polyester trim on the sides and bottom of the net.
• One eyelet in each upper corner of the net
• 3mm double tension cord.
• 6mm plastic-coated steel cable

Ratchet for tensioning the paddle tennis net

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, black polyester trim on the sides and bottom of the net. An eyelet in each upper corner of the net and 3mm double tension cord. 5mm plastic-coated steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

3mm knotless propiprotileno mesh, made with perimeter finish.

Size: 3x20mt

Color: black.

Special pegs for artificial turf.

Pack of 100 units.

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

Set of nets for 2 field hockey goals made of polypropylene.

Size: 3.66 x 2.14 x 0.9 x 1.20m

Different colors available.

Knotless square mesh, 45mm, knotless

Mesh 3 or 4mm thick.

* Also available in size for indoor hockey

Equipped with a new anti-injury system for net placement, guide rod instead of hook.

All our hoops have the same wheelbase, 7 cm high x 8.50 cm wide.

Description: Modo model bench made of high-quality polyethylene

Materials: Seat and backrest in high-density polyethylene (HDPE).

Legs: High-density polyethylene + Fiberglass

– UV treated.

– Maintenance-free.

– Anti-graffiti.

– High robustness.

– Stainless steel screws.

– Packaging: Palletized and plasticized.

• The Playmate Volley Dream ball machine is a high-quality portable machine with an aluminum housing and battery supply. It meets the highest safety requirements. There is a sensor installed that immediately stops the ball projection if a person is in the immediate vicinity in the direction of departure. In addition, the new Volley Dream comes with a lockable lid, which must be locked for safety reasons in game mode.

It can be programmed in seven directions. For example: right, center, left, left right, right, center. Similarly, it plays topspin and smash, as well as short-long. The ball output can be adjusted from 6-60 balls per minute. An ideal device for individual or group training. Exact throwing accuracy and quiet operation. With the newly integrated “i-Playmate” attachment, you can use an app to control playmate i-Shmash via i-Phone or i-Pad, as well as record, document and compare your training achievements.
Technical data:

• Capacity: about 180 balls with the lid closed.
• Dimensions: (height x width x depth) 64 x 56 x 48 cm
• Weight: 31 kg
• Power connection: battery operation (charging current 230 V)
• Battery life: min 4 hours
• Charging time: 6 hours
• Maximum speed: 140 km / h
• Ball sequence: 1 – 10 sec.
• Trajectory: short-long, infinitely adjustable ball types top spin, slice
• Shot types: Topspin and smash
• Dispersion angle: 7 directions center-right
• Housing: aluminum with lockable lid
• Safety: Turn off sensors
• Remote control: wireless, on / off

Description: Alvium model bench made of high-quality polyethylene (MDPE).

Material: Medium density polyethylene (MDPE).

CHARACTERISTICS:

– Ecological and recyclable.

– Anti-graffiti and easy to clean.

– Maintenance-free.

– Economical and durable.

– UV treated.

– High robustness.

– Available in various colors

Made of aluminum,

Working width: 145 cm.

Replaceable rubber blade.

2 resistant wheels on the front.

Ideal for water removal and ball collection.

Works especially well around swimming pools, driveways, golf courses and any flat or hard surface.

1″ Barcelona aluminum fitting for connection to irrigation hose.

• Polyester guide center
• Aluminum carabiner.

Plastic adjusting buckle