Front paddle protection net 2x14mt.

3mm knotless propiprotileno mesh, made with perimeter finish.

Size: 3x20mt

Color: black.

3mm knotless polypropylene mesh, manufactured, with perimeter finish.

Size: 3x16mt

Color: black.

• Tennis net in 4mm thick polypropylene with upper PVC tape and lateral and lower reinforcements, customized with screen printing, with the logo provided by the client.

Minimum 10 units.

• Made with High Tenacity Polypropylene Thread
• 4mm thick net, 43mm mesh width.
• White PVC top band,
• Black polyester trim on the sides and bottom of the net.
• One eyelet in each upper corner of the net
• 3mm double tension cord.
• 6mm plastic-coated steel cable

3mm knotless propiprotileno mesh, manufactured, with perimeter finish.

Size: 2x20mt

Color: black.

Ratchet for tensioning the paddle tennis net

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, black polyester trim on the sides and bottom of the net. An eyelet in each upper corner of the net and 3mm double tension cord. 5mm plastic-coated steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

3mm knotless propiprotileno mesh, made with perimeter finish.
Installation not included.

Size: 2x14mt

Color: black.

• Made with High Tenacity Polypropylene Thread
• 4mm thick net, 43mm mesh width.
• White PVC top band,
• Black polyester trim on the sides and bottom of the net.
• One eyelet in each upper corner of the net
• 3mm double tension cord.
• 6mm plastic-coated steel cable

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)