Futsal goal set with basketball hoop

PRODUCTION TO ORDER. ALWAYS ANCHOR TO THE GROUND. Goals composed of a frame (crossbars and posts) of

FIFA standard dimensions of 3.00 x 2.00 meters inside and a basketball hoop with vandal-proof backboard with perforated sheet of

minibasket dimensions but with the regulation height to the basketball hoop, the projection of said hoop is 65 cm.

IMPORTANT, anchoring the structure to the ground is necessary and mandatory using the 7 plates with 1.5 cm holes that

• are included to be able to screw it to the ground each goal. Includes hoops and nets. Possibility of painting in gray, green, white. Consult other options

FEATURES

• Screening range 0/1mm.
• Screening with 10% Grain and 90% fines
• From 800º baked brick with homogeneous ceramic color
• IDEAL FOR SUMMER
• Recommended to create a layer on the base and retain maximum moisture.
• PALLET OF 1200KG 60 bags of 20kg.
• Non-returnable pallet included

FEATURES

• Orange color
• Controlled particle size
• Screening range of impalpable minimum dimension and 1.40 mm diameter.
• Uniformity in raw material
• From homogeneous quality baked red brick
• Average humidity 2.50%.
• PALLET OF 1000KG 50 bags of 20kg.

• The Playmate Volley Dream ball machine is a high-quality portable machine with an aluminum housing and battery supply. It meets the highest safety requirements. There is a sensor installed that immediately stops the ball projection if a person is in the immediate vicinity in the direction of departure. In addition, the new Volley Dream comes with a lockable lid, which must be locked for safety reasons in game mode.

It can be programmed in seven directions. For example: right, center, left, left right, right, center. Similarly, it plays topspin and smash, as well as short-long. The ball output can be adjusted from 6-60 balls per minute. An ideal device for individual or group training. Exact throwing accuracy and quiet operation. With the newly integrated “i-Playmate” attachment, you can use an app to control playmate i-Shmash via i-Phone or i-Pad, as well as record, document and compare your training achievements.
Technical data:

• Capacity: about 180 balls with the lid closed.
• Dimensions: (height x width x depth) 64 x 56 x 48 cm
• Weight: 31 kg
• Power connection: battery operation (charging current 230 V)
• Battery life: min 4 hours
• Charging time: 6 hours
• Maximum speed: 140 km / h
• Ball sequence: 1 – 10 sec.
• Trajectory: short-long, infinitely adjustable ball types top spin, slice
• Shot types: Topspin and smash
• Dispersion angle: 7 directions center-right
• Housing: aluminum with lockable lid
• Safety: Turn off sensors
• Remote control: wireless, on / off

• The wide range of speeds makes this machine an excellent choice for all beginners. Due to the small size and light weight, it can be easily stored and fits in almost any car trunk. A good option for sports classes in schools, as well as for private use.

The trajectory of the ball is manually adjustable with the push buttons. The oscillator launches random shots across the court.

Technical data:

Ball capacity: 125 balls

Dimensions: (HxWxD): closed 31 x 50 x 46 cm

Weight: 13 kg

Power supply: battery

Playing time: 2 – 3 hours

Recharge time: 12 hours

Feed interval: 1.5-10 sec.

Maximum speed: 96 km/h

Line-directions: 1 direction and random

Ball spin: no

Case: plastic

Remote control: no: on and off switch

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

• The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
• The milled material is ejected and can be transported in wheelbarrows with little effort.

The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

• The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

• It adapts to all access doors and can be easily operated by a single person.

TECHNICAL DETAILS:

• – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

– Length: approx. 800 mm

– Width: approx. 850 mm.

– Height: approx. 1000 mm

– Milling width: approx. 655 mm

– Weight: approx. 75 kg

* Honda engine warranty

The net system can be set up and dismantled very quickly using a practical connection system.

The net is simply placed on the two supports..

Net tension adjustable to 5 measurements.

Storage bag attached.

Size: 3m x 0.85m