Galvanized straightedge

Aluminum rake with soft rubber teeth

Wooden handle.

For collecting leaves and surface dirt from the court.

Width: 75cm.

Bucket with galvanized grid and sponge with aluminum handle.

To absorb small puddles on the court.

There is a replacement for the foam

Fixing bracket with 2 hooks for hanging hand brushes, mats, etc.

Made of steel, green, plastic-coated for Ø 60 mm posts.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15mts.

Wooden ruler

Working width: 2 mts.

Very light.

For filling holes and leveling irregularities.

Working width 100 cm wide.

With wooden handle.

1.2mm prolipoptrilene bristles.

Arch-shaped handles and aluminum profile.

2mt working width.

To remove dirt after rain.

For brushing the court.

• * IDEAL TOOL FOR TROMBER TENNIS

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

Aluminum profile.

Aluminum handle

High-strength rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– For working damp soil.

Joint tape for the installation of turf.

0.15x25mt roll.

Seaming tape for lawn installation.

0.30x25mt roll.

3x2mt shock-absorbing net in polypropylene.

Knotless square mesh, 100mm, knotless

3 and 4mm thick mesh.

Different colors.

• The Tennis Tutor PLUS ball machine is battery operated.

It is as portable as a suitcase.

The ball speed is adjustable from a light launching ball for beginners, to a high-speed ball for advanced players.

The trajectory can be set between the net and the baseline, regular ball sequence and arbitrary dispersion angle.

Technical data:

Ball capacity: 150 balls

Dimensions (HxWxD): 51 x 50 x 50 cm

Weight: 21.6 kg

Power connection: Battery operation (charging current 230 V)

Playing time: 4-6 hours

Recharge time: 12 hours

Feed interval: 1.5-10 sec.

Maximum speed: 136 km/h

Trajectory: short – long adjustable

Ball type: Top Spin, Spin, Flat, Cut

Dispersion angle: 1 direction and random

Material: plastic

Remote control: yes, on/off

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

• Superior quality aluminum umpire chair, powder-coated, GS tested according to DIN EN 131.
• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm

Superior quality aluminum umpire chair, unpainted.

• Wider non-slip steps and the outstanding support with four feet provide optimum stability.

The tray between the steps of the ladder provides additional stability and serves as a storage area.

The seat support also has a cross brace behind the UV-resistant plastic seat.

A folding plastic writing board is included.

• Seat height 1855 mm – projection 1505 mm – front width 760 mm