Galvanized straightedge

For filling holes and leveling irregularities.

Working width 100 cm wide.

With wooden handle.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15m

Aluminum ruler

Working width: 2m

Metal mesh sieve or screen.

Various mesh thicknesses from 1.40 to 6.10mm.

To achieve perfect homogenization of the clay court.

Made of aluminum,

Working width: 145 cm.

Replaceable rubber blade.

2 resistant wheels on the front.

Ideal for water removal and ball collection.

Works especially well around swimming pools, driveways, golf courses and any flat or hard surface.

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

Aluminum toothed scraper

Wooden handle

Working width 70cm

• * Replacement saws available

Rigid plastic support.

Galician wood handle

U-shaped folded rubber.

Working width: 75cm.

– To remove grit from the court

– Used to work damp soil.

– Padel court glass cleaner

Bucket with galvanized grid and sponge with aluminum handle.

To absorb small puddles on the court.

There is a replacement for the foam

Seaming tape for lawn installation.

0.30x25mt roll.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

Line marker for precision lines, especially for marking on artificial and natural grass.

Maintenance-free.

No Maintenance or Cleaning Required

Ergonomic handle.

Comfortable start-up trigger

Tracing width adjustment: 3 to 10 cm.

The aerosol can holder is reinforced

The wind guard ensures perfect marking

Highly resistant reinforced metal chassis.

Lateral support for marking at the edge of pallets, machines, walls, etc.

Aerosol can compartment for quick paint availability

Includes tracing cord and can of az

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

It is an electric skate, small in size, customizable,

optimal for performing tennis court maintenance services

.

Its rear anchor allows the following tools to be adapted:

• Mat
• Wide yellow brush
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Titan 240W LED Projector, Lumileds LED, 40,800 lumens, 170 lm/w, 5000K, IP66, IK08, CRI+70, asymmetric optics Titan 150W LED Projector, Philips LED, 22,500 lumens 150 lm/w, 5000K, IP66, IK08, CRI+70, asymmetric optics

• Polyester guide center
• Aluminum carabiner.

Plastic adjusting buckle