Green Manual Roller
Green Manual Roller
Roller with built-in cleaning brush.
Capacity 330L
Working width 1MT.
Painted with oven drying.
Stainless bearings.
For manual use or for multi-tool.
You may also be interested in
SPECIAL US II Manual Roller
1.056,00 €Manual roller for tennis courts and sports fields.
- Working width 90 cm.
Empty weight 60 kg, with water filling 180 kg
- Divided roller body, which facilitates turning.
- Without counterweights. (Also manufactured with counterweights)
SPECIAL US I Manual Roller
808,50 €Manual roller for tennis courts and sports fields.
Working width 90 cm.
Empty weight 60 kg, with water filling 180 kg,
One-piece roller with rounded edges.
Without counterweights (The same model is also manufactured with counterweights)
What you’ve seen…
Volleyball net
Request a quoteMade with high-tenacity polypropylene thread.
- 3mm thick net, 100mm mesh width.
- Black polyester top band on the sides and at the bottom of the net.
- Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
- 0.6mm plastic-coated steel cable.
- Fiberglass rods inserted on the sides.
- Also available with PVC top tape and for High Competition.
Oslo Bench – Various sizes
324,50 €- The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
- The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.
All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.Valeria 38 turf
25,50 €TECHNICAL CHARACTERISTICS
Composition: mixture of polyethylene and polypropylene monofilament – 4 colors
Resistant to UV rays
Total thickness: ± 40 mm.
Total weight: ± 2885 gr / m²
ANTISTATIC
- Height: 38 mm turf
- Stitches: 21420
- European manufacture
2-space bicycle rack
112,20 €- Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.
Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.
Badminton net
Request a quoteBASIC BADMINTON C-PVC SUPERIOR
-Size: 1.85×1.22m
-Made with High Tenacity Polypropylene Thread.
-2mm thick net, 18mm mesh width.
-White PVC top band, black polyester trim on the sides and bottom of the net.
-One eyelet in each upper corner of the net and double tension cord of 0.3mm.
-0.4mm plasticized steel cable.
* Also available in BASIC BADMINTON C-PES SUPERIOR and HIGH COMPETITION BADMINTON C-PS SUPERIOR.
Front paddle protection net 2x10mt.
83,60 €3mm knotless propiprotileno mesh, manufactured, with perimeter finish.
Size: 2x20mt
Color: black.
Green Manual Roller
2.310,00 €Roller with built-in cleaning brush.
Capacity 330L
Working width 1MT.
Painted with oven drying.
Stainless bearings.
For manual use or for multi-tool.
Replacement court sweeper
57,20 €Replacement court sweeper. 90cm
USP10 milling machine
3.058,00 €- The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
- The milled material is ejected and can be transported in wheelbarrows with little effort.
The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.
- The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.
Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.
- It adapts to all access doors and can be easily operated by a single person.
TECHNICAL DETAILS:
- – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP
– Length: approx. 800 mm
– Width: approx. 850 mm.
– Height: approx. 1000 mm
– Milling width: approx. 655 mm
– Weight: approx. 75 kg
* Honda engine warranty











