HUNTER PGP-10CM Sprinkler

• Models: 10 and 15 cm
• Models with stainless steel riser: 10 and 15 cm
• Arc setting: 50 to 360 degrees
• Factory-installed rubber cover
• Top-adjustable arc
• Quick arc verification mechanism
• Water-lubricated gear drive
• Nozzle types: 12
• Nozzle models: #4 to #2
• Warranty period: 5 years

Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

Lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications.

Jet, mist and shut-off effects

Fixed teeth

Made of impact-resistant ABS

Effective range 25mts jet effect @ 7 bar

Compatible for UNE23400 1” connection

• Weight: 0.020 kg

• Length: 13 cm

Fitting not included

• Recommended hose line: 25.4 mm

Control the irrigation of your court from your mobile (Wi-Fi) with programming by sectors, adjustable times and flow rates, and manual activation option. Homogeneous coverage on clay, easy installation and maintenance. Request information. Custom projects.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Flexible hose made of plasticized food-grade PVC, with polyester textile reinforcement embedded in TPU resin, mechanically strong, blue exterior. Does not stain pavements when rubbed. Resistant to detergents, disinfectant solutions and low-content fats. Resistant to atmospheric agents. Working temperature: -5ºC to +60ºC

Price per 50 meters.

1″ Barcelona aluminum fitting for connection to irrigation hose.

• Made with High Tenacity Polypropylene Thread
• 4mm thick net, 43mm mesh width.
• White PVC top band,
• Black polyester trim on the sides and bottom of the net.
• One eyelet in each upper corner of the net
• 3mm double tension cord.
• 6mm plastic-coated steel cable

The new ball collection net eliminates the risk of injuries caused by tennis balls on the court. Whether for individual or group training, when using ball machines, this net prevents tennis balls from rolling around the court. The simple and quick collection of balls also saves time.

2 Layers of fine mesh PVC material, with a final finish

Length: 1.15m

Aluminum ruler

Working width: 3m

Aluminum toothed scraper

Wooden handle

Working width 70cm

• * Replacement saws available

Aluminum profile.

Aluminum handle

High-strength rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– For working damp soil.

• REMOVABLE SIDES: The sides can be completely removed. The lower part of the side is closed and the upper part are platforms with bars.
• TECHNICAL DATA: The garden trailer has the following data: Tires: 4.00-8 c I General dimensions approx. (L x W x H): 167 x 80 x 80 – 108 cm (with the bars) I (L x W x H): 110 x 71 x 35 – 62 cm (without the bars) I Max. load weight: 300 kg I Tare: 55kg I Height of the sides (without the bar platforms): 330 mm I Height of the sides (with the bar platforms): 630mm Maximum speed: 5 km/h
• UNIVERSAL HITCH: The trailer has a universal hitch. The hitch IS NOT a ball hitch, it is not a trailer for street traffic, but for use in private gardens, orchards, etc.
• IDEAL: The trailer is suitable for soil, foliage, sand, gravel, gardening tools, plants, flowers, small or medium boxes, etc.

Total WIDTH: 167 cm

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, polyester tape on the sides and black polyester trim on the bottom of the net. An eyelet in each corner of the net and 3mm double tension cord. 5mm plasticized steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

Spare parts for tennis net posts – Wrench for tensioning mechanism