Internal post mechanism

Set of round tennis posts ø 83 mm.

Color: Aluminum

• Special aluminum profile with a wall thickness of 3.5 mm, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum key for easy tensioning of the tennis net.

Plug-in cast aluminum cover with safety chain.

Total length of posts 142 cm.

Weight 10.5 kg.

Aluminum anchor sheath, insertion depth of 35 cm with cast aluminum cover. GS tested according to DIN EN 1510.

• Set of square posts, 80 x 80 mm.

Color: Aluminum

• Special profile of reinforced aluminum with groove to hold the net retaining rod.
• Internal trapezoid tension mechanism with aluminum wrench for easy net tensioning.
• Cast aluminum clip-on cover that includes safety chain.
• Total length of posts: 142 cm. Weight: 10.5 kg.

Aluminum anchoring sleeves, insertion depth 35 cm, complete with cast aluminum cover. Complies with European safety standard DIN EN 1510.

Practical mobile net system for children, with tubes that join together.

• Easy to assemble and very stable due to its wide supports.
• 1 nylon net, with automatic tensioning system.
• It can be stored in a small space in its practical bag.
• Size: 6.10 x 0.85 m.
• Approximate weight. 6.5 kg.

Spare parts for tennis net posts – Wrench for tensioning mechanism

Bimbi children’s tennis set of 3.10 m for small court, with 2 Topspin 60 cm tennis rackets and 6 Bimbi Easy balls.

Measurement: 3m 0.85 m

Set of 2 aluminum sleeves for round net posts with a diameter of 83mm.

Set of round tennis posts ø 83 mm.

Color: Green, white and black

• Special aluminum profile with 3.5 mm wall thickness, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum wrench for easily tensioning the tennis net.

Plug-in cast aluminum cap with safety chain.

Total length of posts 142 cm.

Weight 10.5 kg.

Anchor sleeves NOT INCLUDED

The net system can be set up and dismantled very quickly using a practical connection system.

The net is simply placed on the two supports..

Net tension adjustable to 5 measurements.

Storage bag attached.

Size: 3m x 0.85m

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

Weight: 7.5 kg

Supported weight: 240 kg

• Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

Seat: 150 x 37 cm – Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)