Internal post mechanism

Bimbi children’s tennis set of 3.10 m for small court, with 2 Topspin 60 cm tennis rackets and 6 Bimbi Easy balls.

Measurement: 3m 0.85 m

Spare parts for tennis net posts – Wrench for tensioning mechanism

The net system can be set up and dismantled very quickly using a practical connection system.

The net is simply placed on the two supports..

Net tension adjustable to 5 measurements.

Storage bag attached.

Size: 3m x 0.85m

Set of 2 aluminum sleeves for round net posts with a diameter of 83mm.

Set of round tennis posts ø 83 mm.

Color: Aluminum

• Special aluminum profile with a wall thickness of 3.5 mm, with internal reinforcement and groove to hold the net retaining rod Internal trapezoidal tension mechanism with aluminum key for easy tensioning of the tennis net.

Plug-in cast aluminum cover with safety chain.

Total length of posts 142 cm.

Weight 10.5 kg.

Aluminum anchor sheath, insertion depth of 35 cm with cast aluminum cover. GS tested according to DIN EN 1510.

• Set of single posts for net support.

2 Units

Made of aluminum.

Color: Green, white, black, blue

• Natural aluminum color = €36

It is used in ATP and WTA tournaments, Davis Cup and Federation Cup.

Solid aluminum construction with special 80×80 mm profiles.

Natural aluminum color and painted white or black.

Delivered in five pieces, one piece is removed for single use.

Equipped with GS-real cut net posts, with clamping mechanism.

• Delivered with integrated weights, sufficient for amateurs and training use.

For official tournaments we recommend additional weights.

Net is not included.

Bimbi children’s tennis set of 6.10 m for small court, with 4 Topspin tennis rackets of 60 cm and 12 Bimbi Easy balls.

Size: 6.10 m x 0.85 m

Set of nets for goals in high tenacity polypropylene, polyamide and polyester. They meet the requirements of the regulations applicable in each sport. Quick and easy installation. Great variety in thicknesses, meshes and colors. High tensile strength and UV resistant.

* Catalog attached – Request a quote.

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

• Pitching rubber

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

For filling holes and leveling irregularities.

Working width 100 cm wide.

With wooden handle.

Wire brush for attaching to a multi-tool

Working width 2MT.

Iron bristles.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

Polyester guide center.

Velcro adjusting strap on the ends.

Aluminum carabiner.

• Polyester guide center
• Aluminum carabiner.

Plastic adjusting buckle