Lateral Padel Protection Net 3x20mt.

• Made with High Tenacity Polypropylene Thread
• 4mm thick net, 43mm mesh width.
• White PVC top band,
• Black polyester trim on the sides and bottom of the net.
• One eyelet in each upper corner of the net
• 3mm double tension cord.
• 6mm plastic-coated steel cable

3mm knotless propiprotileno mesh, manufactured, with perimeter finish.

Size: 2x20mt

Color: black.

3mm knotless propiprotileno mesh, made with perimeter finish.
Installation not included.

Size: 2x14mt

Color: black.

Ratchet for tensioning the paddle tennis net

3mm knotless polypropylene mesh, manufactured, with perimeter finish.

Size: 3x16mt

Color: black.

• Tennis net in 4mm thick polypropylene with upper PVC tape and lateral and lower reinforcements, customized with screen printing, with the logo provided by the client.

Minimum 10 units.

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, black polyester trim on the sides and bottom of the net. An eyelet in each upper corner of the net and 3mm double tension cord. 5mm plastic-coated steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

Set of nets for 2 indoor soccer goals made of polypropylene.

50mm HEX knotless hexagonal mesh, knotless

Different sizes, colors, and designs available.

Mesh with a thickness of 3, 4, 4.5, and 5mm.

* Catalog attached – Request a quote

FEATURES

• Screening range 0/2mm.
• Screening with 10% Grain and 90% fines
• From 800º baked brick with homogeneous ceramic color
• IDEAL FOR SUMMER
• Recommended to create a layer on the base and retain maximum moisture.
• PALLET OF 1200KG 60 bags of 20kg.
• Non-returnable pallet included

Flexible profile made of hard PVC, white color

Transverse grooves 4 mm wide, at 28 mm intervals.

18 pieces of anchor pipe

4 rolls of 24 m = 4 cm

1 roll of 22 m = 5 cm wide

• 1 roll of 30 m = 5 cm wide
• Material needed for the installation of a court, which can be done by one person
• * The use of hard PVC and cross slits results in excellent anchoring with the surface of the court.

• Models: 10 and 15 cm
• Models with stainless steel riser: 10 and 15 cm
• Arc setting: 50 to 360 degrees
• Factory-installed rubber cover
• Top-adjustable arc
• Quick arc verification mechanism
• Water-lubricated gear drive
• Nozzle types: 12
• Nozzle models: #4 to #2
• Warranty period: 5 years

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

Reinforced polyester guide center and Universal embroidery

• Aluminum carabiner.

Metal regulating buckles.

Made with High Tenacity Polypropylene Thread

4mm thick net, 43mm mesh width

White polyester top band

Black polyester tape on the sides and bottom of the net.

Two hooks on each side composed of plastic tensioner and 5mm tension cord.

06mm plasticized steel cable and Fiberglass rods inserted on the sides

The net system can be set up and dismantled very quickly using a practical connection system.

The net is simply placed on the two supports.

Net tension adjustable to 5 measurements.

Storage bag attached.

Size: 6.10mx 0.85m

The net system can be set up and dismantled very quickly using a practical connection system.

The net is simply placed on the two supports..

Net tension adjustable to 5 measurements.

Storage bag attached.

Size: 3m x 0.85m

• Set of square posts, 80 x 80 mm.

Color: Aluminum

• Special profile of reinforced aluminum with groove to hold the net retaining rod.
• Internal trapezoid tension mechanism with aluminum wrench for easy net tensioning.
• Cast aluminum clip-on cover that includes safety chain.
• Total length of posts: 142 cm. Weight: 10.5 kg.

Aluminum anchoring sleeves, insertion depth 35 cm, complete with cast aluminum cover. Complies with European safety standard DIN EN 1510.