Lateral Padel Protection Net 3x20mt.
Lateral Padel Protection Net 3x20mt.
3mm knotless propiprotileno mesh, made with perimeter finish.
Size: 3x20mt
Color: black.
You may also be interested in
Master PVC paddle tennis net
110,00 €- Made with High Tenacity Polypropylene Thread
- 4mm thick net, 43mm mesh width.
- White PVC top band,
- Black polyester trim on the sides and bottom of the net.
- One eyelet in each upper corner of the net
- 3mm double tension cord.
- 6mm plastic-coated steel cable
Lateral paddle tennis protection net 3x16mt.
143,00 €3mm knotless polypropylene mesh, manufactured, with perimeter finish.
Size: 3x16mt
Color: black.
Net post ratchet
35,20 €Ratchet for tensioning the paddle tennis net
Front paddle protection net 2x14mt.
159,50 €3mm knotless propiprotileno mesh, made with perimeter finish.
Installation not included.Size: 2x14mt
Color: black.
Custom Master PVC paddle tennis net
159,50 €- Tennis net in 4mm thick polypropylene with upper PVC tape and lateral and lower reinforcements, customized with screen printing, with the logo provided by the client.
Minimum 10 units.
Custom PVC Padel Tournament Net
143,00 €Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, black polyester trim on the sides and bottom of the net. An eyelet in each upper corner of the net and 3mm double tension cord. 5mm plastic-coated steel cable.
Customized with screen printing, with the logo provided by the client.
Minimum 10 units.
Front paddle protection net 2x10mt.
83,60 €3mm knotless propiprotileno mesh, manufactured, with perimeter finish.
Size: 2x20mt
Color: black.
What you’ve seen…
Table tennis Mod. Tabarca semi-vandal-proof
1.144,00 €- Semi-vandal-proof outdoor table. 7 mm stratified resin board with strong metal bars that allow the joining of the two boards. Metal profile around the entire perimeter. Zinc-plated metal net. Metal legs lacquered in polyester paint in a V shape for greater resistance (includes screws to anchor to the ground). Dimensions 2740 x 1525 x 760 mm. weight 80 kg.
Delta Bench – Various sizes
700,70 €The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.
Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.
Stainless steel screws.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
NeoBarcino Bench – Various sizes
401,50 €Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.
It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.
We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.
THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.
The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a
optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and
impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of
gray-hammered polyester powder paint.
The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.
All the screws are made of stainless steel.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
Stuttgart Bench 2mt
176,00 €- High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
- 6 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 4 posts are manufactured in white or green,
- Weight: 9.9 kg
Weight supported: 320 kg
- Dimensions: Width: 200cm x Depth: 37cm x Height: 41.5cm
Seat: 200 x 37 cm x Seat height: 41.5 cm
- 2 years warranty
(Manufactured in Germany)
Tennis Scoreboard Match Pointer 46x65cm with stand
236,50 €- Scoreboard with 6 rotating plates, for 3 sets.
Good visibility, can be read from both sides, clear, simple, and easy-to-read design.
Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.
Stable aluminum stand, with support rod for the scoreboard and a large refillable plastic base.
Scoreboard size: 46 x 65 cm with 8 cm high numbers.
* International lettering: HOME/GUEST.
2MT Yellow Brush with Arch
231,00 €1.2mm prolipoptrilene bristles.
Arch-shaped handles and aluminum profile.
2mt working width.
To remove dirt after rain.
For brushing the court.
- * IDEAL TOOL FOR TROMBER TENNIS
Master line sweeper brush, detachable
214,50 €Nylon fiber brush.
Galvanized and painted iron handle.
Easy to use.
Lightweight and easy to handle.
Sweeps the width of the line.
Detachable: Spare parts are available.
BCN fitting with pipe
12,10 €1″ Barcelona aluminum fitting for connection to irrigation hose.
BCN fitting for lance or nozzle
11,00 €- Barcelona 1″ threaded aluminum fitting for lance or nozzle.
Female or male
Multi-tool – Wheel set
407,00 €Set of 2 wheels for power tiller with axle, served assembled to the power tiller.
Smooth tread tire.

















