Lawn installation peg

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Anti-weed textile mesh, made of polypropylene.

Resistant to dry rot and fungal attacks.

It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

2x100mt

Seaming tape for lawn installation.

0.30x25mt roll.

Textile anti-weed mesh, made of polypropylene.

It is applied as an anti-weed sheet, for artificial grass base, professional growers, gardeners.

Roll size:
1.50x20mt = €46

1.50x40mt = €75

2.10x100mt = €180

* Other sizes or thicknesses consult

• Silica sands are the most ecological and natural in Spain, free of chemical products (amines and hydrofluoric acid) and without salinity. Washed exclusively with natural waters and dried with biomass.
• They are characterized by being aeolian, round or spheroid sands, without edges, allowing the product not to cake or compact, facilitating drainage. Granulometries: 0.2-0.5s/ 25kg

SILICA PALLET 1,200kg – 48sacksx25kg

Joint tape for the installation of turf.

0.15x25mt roll.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Dimensions: 273 x 153 x 79.4 cm.

• Playing surface: 4 mm Aluminum/Plastic.
• Aluminum structure 2 x 4 cm.
• Aluminum legs: 8.4 x 8.4 cm with 9 cm diameter levelers.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

TECHNICAL CHARACTERISTICS

Composition: mixture of polyethylene and polypropylene monofilament – 4 colors

Resistant to UV rays

Total thickness: ± 40 mm.

Total weight: ± 2885 gr / m²

ANTISTATIC

• Height: 38 mm turf
• Stitches: 21420
• European manufacture

Set of nets for 2 polypropylene handball goals.

Different sizes, colors and designs available.

100mm knotless square mesh, knotless

Mesh of 3, 4, 4.5 and 5mm thick.

* Catalog attached – Request a quote

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

FEATURES

• Screening range 0/1mm.
• Screening with 10% Grain and 90% fines
• From 800º baked brick with homogeneous ceramic color
• Recommended to create a layer on the base and retain maximum moisture.
• IDEAL FOR SUMMER
• 1000KG BIG BAG

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

Weight: 7.5 kg

Supported weight: 240 kg

• Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

Seat: 150 x 37 cm – Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

Description: Maverik model bench made of high-quality polyethylene.

Materials: Seat and backrest in High Density Polyethylene (HDPE

Legs: High density polyethylene + Fiberglass.

– UV treated.

– Maintenance-free.

– Anti-graffiti.

– High robustness.

– Stainless steel screws.

– Packaging: Palletized and plastic-wrapped

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

Upper protection band, made of padded white polyester.

Extends the durability of the game net.