Lawn installation peg

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Textile anti-weed mesh, made of polypropylene.

It is applied as an anti-weed sheet, for artificial grass base, professional growers, gardeners.

Roll size:
1.50x20mt = €46

1.50x40mt = €75

2.10x100mt = €180

* Other sizes or thicknesses consult

• Silica sands are the most ecological and natural in Spain, free of chemical products (amines and hydrofluoric acid) and without salinity. Washed exclusively with natural waters and dried with biomass.
• They are characterized by being aeolian, round or spheroid sands, without edges, allowing the product not to cake or compact, facilitating drainage. Granulometries: 0.2-0.5s/ 25kg

SILICA PALLET 1,200kg – 48sacksx25kg

Seaming tape for lawn installation.

0.30x25mt roll.

Joint tape for the installation of turf.

0.15x25mt roll.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Anti-weed textile mesh, made of polypropylene.

Resistant to dry rot and fungal attacks.

It is applied as an anti-weed sheet, placed under vegetable or mineral mulching.

2x100mt

Made with high-tenacity polypropylene thread.

• 3mm thick net, 100mm mesh width.
• Black polyester top band on the sides and at the bottom of the net.
• Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
• 0.6mm plastic-coated steel cable.
• Fiberglass rods inserted on the sides.
• Also available with PVC top tape and for High Competition.

TECHNICAL CHARACTERISTICS

Composition: Blend of polyethylene and polypropylene monofilament – 4 colors

Resistant to UV rays

Total thickness: ± 40 mm.

Total weight: ± 2885 gr / m²

Turf height: 38 mm

Stitches: 30,240

European manufacture

Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.

It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.

We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.

THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.

The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a

optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and

impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of

gray-hammered polyester powder paint.

The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.

All the screws are made of stainless steel.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

Set of 3 interlocking bases. Benson PSB

• Pitching rubber

Equipped with a new anti-injury system for net placement, guide rod instead of hook.

All our hoops have the same wheelbase, 7 cm high x 8.50 cm wide.

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

Prefabricated white cement lines, with 2 galvanized iron rods inside.

Width 5 cm.

Length 1.20 meters.
Sold per unit.

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

• The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
• The milled material is ejected and can be transported in wheelbarrows with little effort.

The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

• The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

• It adapts to all access doors and can be easily operated by a single person.

TECHNICAL DETAILS:

• – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

– Length: approx. 800 mm

– Width: approx. 850 mm.

– Height: approx. 1000 mm

– Milling width: approx. 655 mm

– Weight: approx. 75 kg

* Honda engine warranty