Leaf collection rake 1MT

Aluminum toothed scraper

Wooden handle

Working width 70cm

• * Replacement saws available

2 Layers of fine mesh PVC material, with final finish

Length: 1.15mts.

Wooden ruler

Working width: 2 mts.

Very light.

Replacement court sweeper. 90cm

Bucket with galvanized grid and sponge with aluminum handle.

To absorb small puddles on the court.

There is a replacement for the foam

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

Aluminum profile

Aluminum arch handle

High-strength rigid rubber

Working width: 200cm.

– For water collection

– To remove grit from the court

– For working damp soil.

Aluminum profile.

Aluminum handle

High-strength rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– For working damp soil.

Rubber foam roller with handle.

• To remove puddles
• Working width 90cm

Aluminum handle with hanging hook

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

Set of 3 interlocking bases. Benson PSB

BASIC BADMINTON C-PVC SUPERIOR

-Size: 1.85×1.22m

-Made with High Tenacity Polypropylene Thread.

-2mm thick net, 18mm mesh width.

-White PVC top band, black polyester trim on the sides and bottom of the net.

-One eyelet in each upper corner of the net and double tension cord of 0.3mm.

-0.4mm plasticized steel cable.

* Also available in BASIC BADMINTON C-PES SUPERIOR and HIGH COMPETITION BADMINTON C-PS SUPERIOR.

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

• Barcelona 1″ threaded aluminum fitting for lance or nozzle.

Female or male

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Adapter accessory for roller and brush.

With seat

Support pedals.

Easy assembly.