Leaf collection rake 1MT

99,00 
SKU: US40089

Leaf collection rake 1MT

Aluminum rake with soft rubber teeth

Wooden handle.

For collecting leaves and surface dirt from the court.

Width: 75cm.

You may also be interested in

What you’ve seen…

  • Atlas Fountain

    519,20 

    Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

    Finished with epoxy primer and gray hammered powder polyester paint.

    Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

  • Oslo Bench – Various sizes

    324,50 
    • The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
    • The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

    All the screws are made of stainless steel.
    Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

  • Picnic Table

    429,00 

    Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

  • Cement line set BL

    1.775,00 

    Prefabricated lines of white cement and marble sand.

    With 2 galvanized iron rods inside.

    • 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
    • Line length: 1.20 meters.
  • Narrow cement line

    13,20 

    Prefabricated white cement lines, with 2 galvanized iron rods inside.

    Width 5 cm.

    Length 1.20 meters.
    Sold per unit.

  • Replacement court sweeper

    57,20 

    Replacement court sweeper. 90cm

  • Leaf collection rake 1MT

    99,00 

    Aluminum rake with soft rubber teeth

    Wooden handle.

    For collecting leaves and surface dirt from the court.

    Width: 75cm.

  • MAXI-PAW Sprinkler

    60,50 

    Range: 6.7 to 13.7 meters.
    Pressure: 1.7 to 4.1 bar.
    Flow rate: 0.34 to 1.91 m3/h.

    • Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

    Female side inlet: ½” (15/21)
    Trajectory angle:

    23° for nozzles No. 06, 07, 08, 10 and 12
    11° for nozzles 07-LA and 10-LA

    • MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
    • Low angle nozzles: 07-LA (black), 10-LA (yellow)
  • Multi-tool – arm with seat

    638,00 

    Adapter accessory for roller and brush.

    With seat

    Support pedals.

    Easy assembly.

  • Wrench for the tensioning mechanism

    15,40 

    Spare parts for tennis net posts – Wrench for tensioning mechanism