Markwort baseball pitching rubber

• Pitching rubber

Set of elements for the installation of the batter’s plate.

Set of 3 interlocking bases. Benson PSB

Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

Finished with epoxy primer and gray hammered powder polyester paint.

Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

3mm knotless propiprotileno mesh, made with perimeter finish.
Installation not included.

Size: 2x14mt

Color: black.

• Tennis net in 4mm thick polypropylene with upper PVC tape and lateral and lower reinforcements, customized with screen printing, with the logo provided by the client.

Minimum 10 units.

Fixing bracket with 2 hooks for hanging hand brushes, mats, etc.

Made of steel, green, plastic-coated for Ø 60 mm posts.

Absorbent drum with foam covering.

• Structure and body of the drum, hot-dip galvanized.
• Thanks to the high absorbency of this roller, it is possible to dry the court in a very short period of time.

Working width 80 cm.

Bucket with galvanized grid and sponge with aluminum handle.

To absorb small puddles on the court.

There is a replacement for the foam

• .• Model: 10 cm
• Sector configuration: from 40° to 360°
• Factory-installed rubber cover
• Top-side sector adjustment
• Quick sector verification mechanism
• Water-lubricated gear drive
• Nozzle types: 27 in total
• Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
• Warranty period: 2 years

4mm thick polypropylene tennis net with PVC top band and side and bottom reinforcements, customized with screen printing, with the logo provided by the client.

Minimum order 10 units.

Set of 2 aluminum sleeves for round net posts with a diameter of 83mm.