Master line sweeper brush, detachable

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

1.2mm prolipoptrilene bristles.

Arch-shaped handles and aluminum profile.

2mt working width.

To remove dirt after rain.

For brushing the court.

• * IDEAL TOOL FOR TROMBER TENNIS

• For scraping tennis courts and removing leaves.
• Ideal tool for spring and autumn season.
• Aluminum U-profile, in which the steel wire bristles are incorporated, which allows collecting leaves, moss or other dirt.

With the steel wire brush, you can scratch and loosen the hardened layer that forms in winter due to frost and snow.

Aluminum arch with a plastic coating in the handle area, designed to receive sufficient pressure along the entire length of the broom, performing the work with little effort.

Length: 200 cm

Guide rod width: 5 cm

Guide rod height: 3 cm

• Bristle height; 7.5 cm

Bristle distance: approx. 1 cm

• Weight: approx. 5.7 kg

Working width 200 cm.

Galvanized solid iron tamper or rammer.

Wooden handle.

For small court repairs and tablet pressing.

Working surface: 20x20cm.

Aluminum toothed scraper

Wooden handle

Working width 70cm

• * Replacement saws available

WIDE YELLOW BRUSH 1MT

Wooden support 1040x65mm

1.2mm polyprotylene bristles

Galician wood handle attached with metal clip.

Working width 1mt.

To remove dirt after rain.

Support: Galician pine wood

Fiber: 1.2mm strong black PVC

Sewn: With galvanized wire

• Galician wood handle 1.2 meters long, adjusted with metal clamp

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

Solid round volleyball posts, 80 x 80mm, made of aluminum.

The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.

Surface of the posts and sliding profiles anodized in matte silver.

Anchoring sleeves are attached.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

Manual roller for tennis courts and sports fields.

Working width 90 cm.

Empty weight 60 kg, with water filling 180 kg,

One-piece roller with rounded edges.

Without counterweights (The same model is also manufactured with counterweights)

• Galvanized ratchet tensioner with fastening anchors and special straps for tensioning the Speziala tennis line.

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Wooden rule

Working width: 3 meters

Flexible hose made of plasticized food-grade PVC, with polyester textile reinforcement embedded in TPU resin, mechanically strong, blue exterior. Does not stain pavements when rubbed. Resistant to detergents, disinfectant solutions and low-content fats. Resistant to atmospheric agents. Working temperature: -5ºC to +60ºC

Price per 50 meters.

Made with high-tenacity polypropylene thread, 3mm thick net, 43mm mesh width. White PVC top band, polyester tape on the sides and black polyester trim on the bottom of the net. An eyelet in each corner of the net and 3mm double tension cord. 5mm plasticized steel cable.

Customized with screen printing, with the logo provided by the client.

Minimum 10 units.

Size: 12.70m long, 1.07m high

• Black polyethylene braided thread, 3.8 mm, green with 4.5 cm mesh.
• Hand-knotted, 6 double rows.
• Upper band, made of polyester mesh with 4 stitches. Interior steel cable covered with plastic.

Sides and lower edges with resistant black plastic edges-

• Two 10 mm thick fiberglass rods for lateral fixation.

High quality net.

• Resistant to UV rays, weathering and color resistant.

3 year factory warranty on the net. GS tested according to DIN EN 1510.