Mini soccer net

Set of nets for goals in high tenacity polypropylene, polyamide and polyester. They meet the requirements of the regulations applicable in each sport. Quick and easy installation. Great variety in thicknesses, meshes and colors. High tensile strength and UV resistant.

* Catalog attached – Request a quote

Set of nets for 2 indoor soccer goals made of polypropylene.

50mm HEX knotless hexagonal mesh, knotless

Different sizes, colors, and designs available.

Mesh with a thickness of 3, 4, 4.5, and 5mm.

* Catalog attached – Request a quote

Set of nets for goals in high tenacity polypropylene, polyamide and polyester. They meet the requirements of the regulations applicable in each sport. Quick and easy installation. Great variety in thicknesses, meshes and colors. High tensile strength and UV resistant.

* Catalog attached – Request a quote.

Set of nets for goals in high-tenacity polypropylene, polyamide, and polyester. They meet the requirements of the applicable regulations in each sport. Quick and easy installation. High tensile strength and UV resistant.

Size: 50.50×2.20 / 0.80×1.50mt

Knotless mesh: Square or hexagonal

Knotted mesh: Square.

Net set for 2 11-a-side football goals.

Mesh made with polypropylene thread, various colors to choose from.

Mesh thickness: 3 – 3.50 – 4 – 4.5 – 5mm.

120mm square or hexagonal mesh.

Available in different sizes.

* Catalog attached – Request a quote

Set of nets for goals in high tenacity polypropylene, polyamide and polyester. They meet the requirements of the regulations applicable in each sport. Quick and easy installation. Great variety in thicknesses, meshes and colors. High tensile strength and UV resistant.

* Catalog attached – Request a quote.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

• Pitching rubber

• Chemical product composed of flakes that dissolve on the court, forming a waterproof solution down to -10ºC, European manufacturing.
• WINTER. With proper treatment, the courts are prevented from freezing and remain usable throughout the winter, avoiding deterioration, which would involve the compaction of the softened ground.

SUMMER. Absorbs ambient humidity, keeping the court moist without the need for watering.

• PALLET OF 1250KG 50 bags of 25kg.

Roller with built-in cleaning brush.

Capacity 330L

Working width 1MT.

Painted with oven drying.

Stainless bearings.

For manual use or for multi-tool.

It is an electric skate, small in size, customizable,

optimal for performing tennis court maintenance services

.

Its rear anchor allows the following tools to be adapted:

• Mat
• Wide yellow brush
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

• The exact height adjustment is done manually with 2 wing nuts, independently on each side, so the milling depth can be determined with millimeter precision.
• The milled material is ejected and can be transported in wheelbarrows with little effort.

The power of the 5.5 hp Honda engine ensures that the blade runs absolutely smoothly, so that the tracks remain flat or become flat again.

• The front part consists of 2 independently mounted rollers. This distributes the pressure evenly so that it hardly sinks in spring, even when thawing.

Solid rubber rear wheels without profile and the low weight make the device extremely agile and mobile.

• It adapts to all access doors and can be easily operated by a single person.

TECHNICAL DETAILS:

• – Engine: Honda, 4-stroke, 4.0 kW / 5.5 HP

– Length: approx. 800 mm

– Width: approx. 850 mm.

– Height: approx. 1000 mm

– Milling width: approx. 655 mm

– Weight: approx. 75 kg

* Honda engine warranty

• Polyester guide center
• Aluminum carabiner.

Plastic adjusting buckle