Mini soccer net

Set of nets for goals in high-tenacity polypropylene, polyamide, and polyester. They meet the requirements of the applicable regulations in each sport. Quick and easy installation. High tensile strength and UV resistant.

Size: 50.50×2.20 / 0.80×1.50mt

Knotless mesh: Square or hexagonal

Knotted mesh: Square.

Set of nets for goals in high tenacity polypropylene, polyamide and polyester. They meet the requirements of the regulations applicable in each sport. Quick and easy installation. Great variety in thicknesses, meshes and colors. High tensile strength and UV resistant.

* Catalog attached – Request a quote

Net set for 2 11-a-side football goals.

Mesh made with polypropylene thread, various colors to choose from.

Mesh thickness: 3 – 3.50 – 4 – 4.5 – 5mm.

120mm square or hexagonal mesh.

Available in different sizes.

* Catalog attached – Request a quote

Set of nets for goals in high tenacity polypropylene, polyamide and polyester. They meet the requirements of the regulations applicable in each sport. Quick and easy installation. Great variety in thicknesses, meshes and colors. High tensile strength and UV resistant.

* Catalog attached – Request a quote.

Set of nets for 2 indoor soccer goals made of polypropylene.

50mm HEX knotless hexagonal mesh, knotless

Different sizes, colors, and designs available.

Mesh with a thickness of 3, 4, 4.5, and 5mm.

* Catalog attached – Request a quote

Seaming tape for lawn installation.

0.30x25mt roll.

Made with high-tenacity polypropylene thread.

• 3mm thick net, 100mm mesh width.
• Black polyester top band on the sides and at the bottom of the net.
• Three hooks on each side consisting of a plastic tensioner and 0.5mm tension cord.
• 0.6mm plastic-coated steel cable.
• Fiberglass rods inserted on the sides.
• Also available with PVC top tape and for High Competition.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
• 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

Weight: 7.5 kg

Supported weight: 240 kg

• Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

Seat: 150 x 37 cm – Seat height: 41.5 cm

• 2 years warranty

(Manufactured in Germany)

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)