Multi-tool – arm with seat

Accessory for Tromber_tenis, Multiherramienta or manual use

Roller with cleaning brush.

Capacity 330L

Working width 1MT.

Painted with oven drying.

Stainless steel bearings.

Set of 2 wheels for power tiller with axle, served assembled to the power tiller.

Smooth tread tire.

Wire brush for attaching to a multi-tool

Working width 2MT.

Iron bristles.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

Set of two cylinders with metal spikes.

Galvanized and oven-dried painted finish.

Easy adaptation to the motor hoe.

Ideal for milling the court, does not lift the rubble.

Axle included.

• REMOVABLE SIDES: The sides can be completely removed. The lower part of the side is closed and the upper part are platforms with bars.
• TECHNICAL DATA: The garden trailer has the following data: Tires: 4.00-8 c I General dimensions approx. (L x W x H): 167 x 80 x 80 – 108 cm (with the bars) I (L x W x H): 110 x 71 x 35 – 62 cm (without the bars) I Max. load weight: 300 kg I Tare: 55kg I Height of the sides (without the bar platforms): 330 mm I Height of the sides (with the bar platforms): 630mm Maximum speed: 5 km/h
• UNIVERSAL HITCH: The trailer has a universal hitch. The hitch IS NOT a ball hitch, it is not a trailer for street traffic, but for use in private gardens, orchards, etc.
• IDEAL: The trailer is suitable for soil, foliage, sand, gravel, gardening tools, plants, flowers, small or medium boxes, etc.

Total WIDTH: 167 cm

• The multi-purpose tractor is designed to keep the court in perfect condition thanks to its variety of accessories, and its size, which allows great mobility between courts.

The Honda FJ DLX tiller without a hoe can be adapted to the following tools using a hitch:

• Smooth band wheels on tractor and trailer.
• Milling machine
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer for transport.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

12KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

Set of nets for 2 field hockey goals made of polypropylene.

Size: 3.66 x 2.14 x 0.9 x 1.20m

Different colors available.

Knotless square mesh, 45mm, knotless

Mesh 3 or 4mm thick.

* Also available in size for indoor hockey

Two-color basketball nets for 12 hooks made of 6mm thick polypropylene thread.

Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

Shade/privacy screen, provides privacy and protects from the wind.
Various densities and colors, rolls of different heights and lengths

Produced in a raschel system, non-fraying product, composed of high-density HDPE monofilament and polyethylene raffia tape.

Facilitates privacy in outdoor work.

It can be adapted to the required size due to its easy cutting.

• Option of custom manufacturing with eyelets.

Fabric very resistant to fraying.

With UV treatment for 2 years of protection.

Mesh manufactured in Spain.

Spare parts for tennis net posts – Wrench for tensioning mechanism

Tension mechanism for tennis net posts (internal)