Multi-Tool – HONDA FJ500 DLX Tiller

2.310,00 
SKU: 30108

Multi-Tool – HONDA FJ500 DLX Tiller

  • The multi-purpose tractor is designed to keep the court in perfect condition thanks to its variety of accessories, and its size, which allows great mobility between courts.

The Honda FJ DLX tiller without a hoe can be adapted to the following tools using a hitch:

  • Smooth band wheels on tractor and trailer.
  • Milling machine
  • Toothed scraper
  • Rubber scraper
  • Metallic scratch brush
  • Adjustable water roller.
  • Trailer for transport.

Información adicional

You may also be interested in

  • Tilting trailer with universal hitch

    495,00 
    • REMOVABLE SIDES: The sides can be completely removed. The lower part of the side is closed and the upper part are platforms with bars.
    • TECHNICAL DATA: The garden trailer has the following data: Tires: 4.00-8 c I General dimensions approx. (L x W x H): 167 x 80 x 80 – 108 cm (with the bars) I (L x W x H): 110 x 71 x 35 – 62 cm (without the bars) I Max. load weight: 300 kg I Tare: 55kg I Height of the sides (without the bar platforms): 330 mm I Height of the sides (with the bar platforms): 630mm Maximum speed: 5 km/h
    • UNIVERSAL HITCH: The trailer has a universal hitch. The hitch IS NOT a ball hitch, it is not a trailer for street traffic, but for use in private gardens, orchards, etc.
    • IDEAL: The trailer is suitable for soil, foliage, sand, gravel, gardening tools, plants, flowers, small or medium boxes, etc.

    Total WIDTH: 167 cm

  • Multi-tool – Wheel set

    407,00 

    Set of 2 wheels for power tiller with axle, served assembled to the power tiller.

    Smooth tread tire.

  • Multi-tool – Wire brush

    759,00 

    Wire brush for attaching to a multi-tool

    Working width 2MT.

    Iron bristles.

    Adjustable height

    Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

    * Brush replacement available

  • Roller with brush

    2.310,00 

    Accessory for Tromber_tenis, Multiherramienta or manual use

    Roller with cleaning brush.

    Capacity 330L

    Working width 1MT.

    Painted with oven drying.

    Stainless steel bearings.

  • Multi-tool – Milling machine set

    825,00 

    Set of two cylinders with metal spikes.

    Galvanized and oven-dried painted finish.

    Easy adaptation to the motor hoe.

    Ideal for milling the court, does not lift the rubble.

    Axle included.

  • Multi-tool – arm with seat

    638,00 

    Adapter accessory for roller and brush.

    With seat

    Support pedals.

    Easy assembly.

What you’ve seen…

  • Front paddle protection net 2x14mt.

    159,50 

    3mm knotless propiprotileno mesh, made with perimeter finish.
    Installation not included.

    Size: 2x14mt

    Color: black.

  • Tennis Scoreboard Match Pointer 46×65

    176,00 
    • Scoreboard with 6 rotating plates, for 3 sets.

    Good visibility, can be read from both sides, clear, simple, and easy-to-read design.

    Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.

    Easy to attach to the fence or net. With fence attachment.

    Size: 46x65cm with 8 cm high numbers.

    * International lettering: HOME/GUEST.

  • Munich Bench 1.50mt

    132,00 
    • High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
    • 4 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 3 positions. They are manufactured in white or green,

    Weight: 7.5 kg

    Supported weight: 240 kg

    • Measurement: Width: 150cm x Depth: 37cm x Height: 41.5cm

    Seat: 150 x 37 cm – Seat height: 41.5 cm

    • 2 years warranty

    (Manufactured in Germany)

  • Tubular anchors for SPEZIALA II

    63,80 

    Anchor set for the installation of Speziala lines: II

    18 stainless steel tubular anchors

    • 8 pieces with 4 cm anchors

    10 pieces with 5 cm anchors.

  • PVC line set – SPEZIALA II

    657,80 

    Flexible profile made of hard PVC, white color

    Transverse grooves 4 mm wide, at 28 mm intervals.

    18 pieces of anchor pipe

    4 rolls of 24 m = 4 cm

    1 roll of 22 m = 5 cm wide

    • 1 roll of 30 m = 5 cm wide
    • Material needed for the installation of a court, which can be done by one person
    • * The use of hard PVC and cross slits results in excellent anchoring with the surface of the court.
  • Replacement court sweeper

    57,20 

    Replacement court sweeper. 90cm

  • Tamper – Rammer

    104,50 

    Galvanized solid iron tamper or rammer.

    Wooden handle.

    For small court repairs and tablet pressing.

    Working surface: 20x20cm.

  • HUNTER PGP-10CM Sprinkler

    33,00 
    • .• Model: 10 cm
    • Sector configuration: from 40° to 360°
    • Factory-installed rubber cover
    • Top-side sector adjustment
    • Quick sector verification mechanism
    • Water-lubricated gear drive
    • Nozzle types: 27 in total
    • Nozzle sets: #1 to #12 red, 1.5 to 8.0 blue, #4 LA to #10 LA gray
    • Warranty period: 2 years
  • Tromber_Tenis 1mt metal brush

    759,00 

    Metal brush to attach to Tromber_Tenis

    Working width 1MT.

    Iron spikes.

    Adjustable height

    Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

    * Brush replacement available

  • Multi-tools – TROMBER_TENIS

    4.224,00 

    It is an electric skate, small in size, customizable,

    optimal for performing tennis court maintenance services

    .

    Its rear anchor allows the following tools to be adapted:

    • Mat
    • Wide yellow brush
    • Toothed scraper
    • Rubber scraper
    • Metallic scratch brush
    • Adjustable water roller.
    • Trailer