Multi-tools – TROMBER_TENIS

Scraper for scraping compacted soil.

Galvanized iron teeth

Working width 1mt

• * Iron teeth replacement available

• Accessory to attach to Tromber
• Rigid nylon bristles.
• Aluminum support
• 2mt working width.
• To remove dirt after rain.
• Paddle court brushing.

Metal brush to attach to Tromber_Tenis

Working width 1MT.

Iron spikes.

Adjustable height

Levels the top layer of red clay, achieving maximum planimetry of the court, removing compacted soil and distributing it throughout the court.

* Brush replacement available

Accessory for Tromber_tenis made of highly resistant rigid rubber

Working width: 100cm.

– For water collection

– To remove grit from the court

– To work the damp soil.

Accessory for Tromber_Tenis multi-tool

2 Layers of fine mesh PVC material, with final finish

Length: 1.15 meters

Aluminum rule

Working width: 2 meters

Two-component PU adhesives consist of a resin (component A) and a hardener (component B), mixed in a defined proportion. of two-component adhesive.

5KG can.

The adhesive performance is approximately 0.40/0.60 kg of adhesive per M2.

All our adhesives are certified according to UNE-EN 13744:2006 and UNE-EN 12228:2002 regulations required by FIFA for the installation of artificial turf in accredited and approved sports fields and facilities.

• BEACH VOLLEYBALL COMPETITION

-Measurement: 1.80×1.20×0.70×0.70

-Knotless net made of 3mm high-tenacity polypropylene with 100x100mm mesh, black.

-5cm wide blue tape on the upper part and 3×5 plastic-coated steel cable passed through its interior, black polyester tape on the sides.

-Blue tape on the lower part.

-Tension cords on the upper and lower sides.

* Also available: beach volleyball training net.

• Made with High Tenacity Polypropylene Thread
• 4mm thick net, 43mm mesh width.
• White PVC top band,
• Black polyester trim on the sides and bottom of the net.
• One eyelet in each upper corner of the net
• 3mm double tension cord.
• 6mm plastic-coated steel cable

Roller with built-in cleaning brush.

Capacity 330L

Working width 1MT.

Painted with oven drying.

Stainless bearings.

For manual use or for multi-tool.

Prefabricated white cement lines, with 2 galvanized iron rods inside.

Width 5 cm.

Length 1.20 meters.

Sold per unit.

Galvanized iron square straightedge 50x50x2mm.

Length: 3 meters.

For leveling courts.

Essential for making baselines.

1″ Barcelona aluminum fitting for connection to irrigation hose.

Range: 6.7 to 13.7 meters.
Pressure: 1.7 to 4.1 bar.
Flow rate: 0.34 to 1.91 m3/h.

• Double female thread lower inlet: ½” (15/21) and ¾” (20/27)

Female side inlet: ½” (15/21)
Trajectory angle:

23° for nozzles No. 06, 07, 08, 10 and 12
11° for nozzles 07-LA and 10-LA

• MPR Nozzles: 06 (red), 07 (black), 08 (blue), 10 (yellow), 12 (beige)
• Low angle nozzles: 07-LA (black), 10-LA (yellow)

Set of 2 wheels for power tiller with axle, served assembled to the power tiller.

Smooth tread tire.

Tension mechanism for tennis net posts (internal)