NeoBarcino Bench – Various sizes

Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.

The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.

Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.

Stainless steel screws.

Recommended anchoring: By means of M10 expansion bolts according to surface and project.

• The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
• The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.

All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.

• Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.

Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.

• BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.

Measurements 885xD370m

Hinged bucket with safety lock.

Reinforced feet.

Zinc-plated and immersion electrowelded steel sheet.

Painted in gray RAL 7011

Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.

Finished with epoxy primer and gray hammered powder polyester paint.

Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.

• Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.

Measurements: 455mm diameter, 605mm total height.

Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.

• Bicycle rack manufactured in hot-dip galvanized steel.

Anchoring: Using M8 expansion bolts, depending on the surface and project.

Set of nets for goals in high tenacity polypropylene, polyamide and polyester. They meet the requirements of the regulations applicable in each sport. Quick and easy installation. Great variety in thicknesses, meshes and colors. High tensile strength and UV resistant.

* Catalog attached – Request a quote.

Set of nets for 2 polypropylene handball goals.

Different sizes, colors and designs available.

100mm knotless square mesh, knotless

Mesh of 3, 4, 4.5 and 5mm thick.

* Catalog attached – Request a quote

Description: Alvium model bench made of high-quality polyethylene (MDPE).

Material: Medium density polyethylene (MDPE).

CHARACTERISTICS:

– Ecological and recyclable.

– Anti-graffiti and easy to clean.

– Maintenance-free.

– Economical and durable.

– UV treated.

– High robustness.

– Available in various colors

• High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.

4 plastic feet and 9 multi-chamber profile slats, reinforcement angle in the middle, 3 positions.

Manufactured in white and green

Weight: 13.6 kg

Supported weight: 240 kg

• Width: 150cm x Depth: 54cm x Height: 74 cm.
• Seat: 150 x 38cm Backrest height: 35cm Seat height: 44cm

2 years warranty

Manufactured in Germany

Prefabricated lines of white cement and marble sand.

With 2 galvanized iron rods inside.

• 32 wide lines of 5.5cm + 92 narrow lines of 4.5cm.
• Line length: 1.20 meters.

Prefabricated white cement lines, with 2 galvanized iron rods inside.

Width 5 cm.

Length 1.20 meters.

Sold per unit.

Made of aluminum,

Working width: 145 cm.

Replaceable rubber blade.

2 resistant wheels on the front.

Ideal for water removal and ball collection.

Works especially well around swimming pools, driveways, golf courses and any flat or hard surface.

Push-button irrigation solution for tennis courts that quickly and evenly wets the surface, with pre-set time and flow to prevent flooding and save water. Compatible with clay and resin surfaces, easy to install and maintain, with protected button and perimeter sprinkler irrigation. Request information.

It is an electric skate, small in size, customizable,

optimal for performing tennis court maintenance services

.

Its rear anchor allows the following tools to be adapted:

• Mat
• Wide yellow brush
• Toothed scraper
• Rubber scraper
• Metallic scratch brush
• Adjustable water roller.
• Trailer

High Tenacity Polypropylene Thread

4mm thick net, 43mm mesh width.

White Polyester Top Band

Polyester tape on the sides and black trim on the bottom

One eyelet in each corner of the net and 3mm double tension cord.

6mm plasticized steel cable