NeoBarcino Bench – Various sizes
NeoBarcino Bench – Various sizes
Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.
It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.
We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.
THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.
The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a
optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and
impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of
gray-hammered polyester powder paint.
The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.
All the screws are made of stainless steel.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
You may also be interested in
Semi-circular trash can 40L
115,50 €- Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.
Measurements: 455mm diameter, 605mm total height.
Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.
Delta Bench – Various sizes
700,70 €The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.
Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.
Stainless steel screws.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
Atlas Fountain
519,20 €Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.
Finished with epoxy primer and gray hammered powder polyester paint.
Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.
6-space bicycle rack
159,50 €- Bicycle rack manufactured in hot-dip galvanized steel.
Anchoring: Using M8 expansion bolts, depending on the surface and project.
2-space bicycle rack
112,20 €- Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.
Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.
Circular metal trash can 60l
88,00 €- BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.
Measurements 885xD370m
Hinged bucket with safety lock.
Reinforced feet.
Zinc-plated and immersion electrowelded steel sheet.
Painted in gray RAL 7011
Oslo Bench – Various sizes
324,50 €- The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
- The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.
All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.
Picnic Table
429,00 €Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.
What you’ve seen…
80x80mm Square Aluminum Volleyball Post
616,00 €Solid square volleyball posts made of 80 x 80mm aluminum.
The net supports and tension devices (galvanized thread mechanism) are adjustable to all measurements.
Surface of the posts and sliding profiles anodized in matte silver.
Anchoring sockets are attached.
Anti-vandal metal basketball net
33,00 €Set of anti-vandal metal basketball nets with 12 hooks.
- Weight 0.64kg – Width 13cm – Height 17cm – Depth 3cm – Volume 0.000663m3
ARTICLE COMPOSED OF 2 UNITS
Lateral Padel Protection Net 3x20mt.
198,00 €3mm knotless propiprotileno mesh, made with perimeter finish.
Size: 3x20mt
Color: black.
Tennis scoreboard Match Pointer 65x95cm with stand
352,00 €- Scoreboard with 6 rotating plates, for 3 sets.
Good visibility, can be read from both sides, clear, simple and easy-to-read design.
Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.
Stable aluminum stand, with support rod for the scoreboard and a large refillable plastic base.
Scoreboard size: 65×95 cm with 12 cm high numbers.
* International lettering: HOME/GUEST.
Alvium color bench
462,00 €Description: Alvium model bench made of high-quality polyethylene (MDPE).
Material: Medium density polyethylene (MDPE).
CHARACTERISTICS:
– Ecological and recyclable.
– Anti-graffiti and easy to clean.
– Maintenance-free.
– Economical and durable.
– UV treated.
– High robustness.
– Available in various colors
Multi-tool – arm with seat
638,00 €Adapter accessory for roller and brush.
With seat
Support pedals.
Easy assembly.
Master superior C-PES tennis net
132,00 €High Tenacity Polypropylene Thread
4mm thick net, 43mm mesh width.
White Polyester Top Band
Polyester tape on the sides and black trim on the bottom
One eyelet in each corner of the net and 3mm double tension cord.
6mm plasticized steel cable
Internal post mechanism
93,50 €Tension mechanism for tennis net posts (internal)