NeoBarcino Bench – Various sizes
NeoBarcino Bench – Various sizes
Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.
It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.
We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.
THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.
The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a
optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and
impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of
gray-hammered polyester powder paint.
The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.
All the screws are made of stainless steel.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
You may also be interested in
Semi-circular trash can 40L
115,50 €- Trash can with semi-circular folding steel bucket with triangular holes with Ferrus treatment to treat corrosion. Final coating of gray RAL 7011 polyester powder paint. Bucket supported on a 40 mm tube structure with an anchoring base and rectangular plates with 2 12 mm holes for fixing to the ground.
Measurements: 455mm diameter, 605mm total height.
Recommended anchoring: By means of four M8 expansion bolts depending on the surface and project.
Delta Bench – Various sizes
700,70 €The DELTA XXI bench is a robust bench with ductile cast iron feet with Ferrus treatment to treat corrosion. The final coating is gray hammer-finish polyester powder paint.
Three 190 x 40 mm section planks and one 130 x 40 mm plank of tropical wood treated with the Lignus triple-layer coating, fungicide, insecticide and water repellent. Natural color finish.
Stainless steel screws.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
Atlas Fountain
519,20 €Fountain with a sober structure, square iron body with Ferrus treatment to prevent corrosion.
Finished with epoxy primer and gray hammered powder polyester paint.
Fixing plate-nickel-plated steel push button tap (UM510G). Angular frame and galvanized steel drain grid.
Picnic Table
429,00 €Pine wood treated in autoclave with class 4 vacuum-pressure against woodworm, termites, and insects. Planks of 1940 × 95 × 45mm.
6-space bicycle rack
159,50 €- Bicycle rack manufactured in hot-dip galvanized steel.
Anchoring: Using M8 expansion bolts, depending on the surface and project.
Circular metal trash can 60l
88,00 €- BENITO circular trash can, manufactured with a hinged steel bucket, with two strips of holes reserving a central space for greater robustness or possible markings. Finished with Ferrus treatment, a protective process for iron that guarantees optimal resistance to corrosion.
Measurements 885xD370m
Hinged bucket with safety lock.
Reinforced feet.
Zinc-plated and immersion electrowelded steel sheet.
Painted in gray RAL 7011
Oslo Bench – Various sizes
324,50 €- The Oslo bench is manufactured with ductile iron feet with Ferrus treatment for corrosion protection. Coated with Marson-colored polyester powder paint.
- The five tropical wood planks are treated with a triple layer of Lignus coating, a fungicide, insecticide, and water repellent protector.
All the screws are made of stainless steel.
Recommended anchoring: Using M10 expansion bolts depending on the surface and project.2-space bicycle rack
112,20 €- Steel bicycle rack with Ferrus anti-corrosion treatment. The Ferrus treatment involves applying an electrolytic bath to the piece, followed by a layer of epoxy primer and finally a coating of gray RAL 9006 powder polyester paint.
Recommended anchoring: Using 4 M8 expansion bolts, depending on the surface and project.
What you’ve seen…
NeoBarcino Bench – Various sizes
401,50 €Sober and elegant, the Neobarcino bench is one of the most requested products in the BENITO URBAN range of urban furniture.
It is possible to purchase the Neobarcino Bench with FSC wood, which comes from controlled logging, or in technical wood.
We add the possibility of customizing the Neobarcino Bench with a permanent marking that identifies the Urban Furniture of your municipality.
THE ORIGINAL HAS THREE COATS OF PAINT AND A PROTECTIVE ANTI-CORROSION TREATMENT.
The NEOBARCINO is a bench manufactured with ductile iron feet treated with Ferrus, an iron protection process that guarantees a
optimal resistance to corrosion. The Ferrus treatment consists of three layers that are applied after cleaning all dirt and
impurities by shot blasting and consists of an electrolytic bath, followed by a layer of epoxy primer and a final coating of
gray-hammered polyester powder paint.
The six tropical wood planks are treated with the Lignus triple-layer coating, a protective fungicide, insecticide, and water repellent.
All the screws are made of stainless steel.
Recommended anchoring: By means of M10 expansion bolts according to surface and project.
Stuttgart Bench 2mt
176,00 €- High-resistance PVC/PP bench, easy to maintain and clean, and with great stability.
- 6 plastic feet and 5 multi-chamber profile slats, so they can be used on both sides without a backrest. 4 posts are manufactured in white or green,
- Weight: 9.9 kg
Weight supported: 320 kg
- Dimensions: Width: 200cm x Depth: 37cm x Height: 41.5cm
Seat: 200 x 37 cm x Seat height: 41.5 cm
- 2 years warranty
(Manufactured in Germany)
Helgoland Bench 1.50m
225,50 €- 150 cm long PVC/PP bench, reinforcement angle in the middle, high seating comfort, detachable,
- high strength, easy maintenance and cleaning, and great stability.
4 plastic feet and 12 multi-chamber profile slats
Manufactured in white or green
Weight: 19 kg
- 2 years warranty
(Made in Germany)
Tennis Scoreboard Match Pointer 46x65cm with stand
236,50 €- Scoreboard with 6 rotating plates, for 3 sets.
Good visibility, can be read from both sides, clear, simple, and easy-to-read design.
Strong and weather-resistant, made of sunlight-resistant plastic and stainless-steel accessories.
Stable aluminum stand, with support rod for the scoreboard and a large refillable plastic base.
Scoreboard size: 46 x 65 cm with 8 cm high numbers.
* International lettering: HOME/GUEST.
STRIPER tracer spray paint
187,00 €Special paint for floors, highly resistant and with high pigmentation.
– Resistant to traffic, inclement weather, and hydrocarbons.
– Quick-drying paint.
– CFC and lead-free paint.
– 7 colors available.
Price per box of 12 unitsMaster line sweeper brush, detachable
214,50 €Nylon fiber brush.
Galvanized and painted iron handle.
Easy to use.
Lightweight and easy to handle.
Sweeps the width of the line.
Detachable: Spare parts are available.
PVC Mat 2MT Wood – Fine double mesh
187,00 €2 Layers of fine mesh PVC material, with final finish
Length: 1.15mts.
Wooden ruler
Working width: 2 mts.
Very light.
Viper VTE-1550 GW red nozzle
27,50 €Lance for B.I.E.S, irrigation of parks and gardens, street cleaning and multiple applications.
Jet, mist and shut-off effects
Fixed teeth
Made of impact-resistant ABS
Effective range 25mts jet effect @ 7 bar
Compatible for UNE23400 1” connection
- Weight: 0.020 kg
- Length: 13 cm
Fitting not included
- Recommended hose line: 25.4 mm
Multi-tools – TROMBER_TENIS
4.224,00 €It is an electric skate, small in size, customizable,
optimal for performing tennis court maintenance services
.
Its rear anchor allows the following tools to be adapted:
- Mat
- Wide yellow brush
- Toothed scraper
- Rubber scraper
- Metallic scratch brush
- Adjustable water roller.
- Trailer

















